Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller

Authors

DOI:

https://doi.org/10.30656/jsmi.v2i2.681

Keywords:

Quality Control, Seven Tools, Statistical Process Control

Abstract

This study aims to demonstrate effectively application of the seven tools as one of the quality management tools to reduce product defects. A case study has been conducted in the production of white body at PT. XYZ, which is located in Semarang. The high percentage of defects is considered as one causes of not attaining the target of the company. Seven tools, which consist of check sheet, stratification, histogram, scatter diagram, control chart, Pareto chart, and cause-and-effect diagram, are used to analyze the causes of the defects. Based on data processing results, there are eight types of defects, namely: tobi, hage, burn back, crolling, saya boro, broken back stamp, hama kake, and nama kire. Recommendations for improvement have been proposed using 5W+1H analysis to improve the company's quality control performance and minimize product defects.

Author Biographies

  • Tio Prima Matondang, Diponegoro University
    Department of Industrial Engineering
  • Muhammad Mujiya Ulkhaq, Diponegoro University
    Department of Industrial Engineering

References

R. D. Banker, I. Khosla, and K. K. Sinha, “Quality and competition,†Manage. Sci., vol. 44, no. 9, pp. 1179–1192, 1998.

D. Hassan and S. Monierâ€Dilhan, “National brands and store brands: competition through public quality labels,†Agribus. an Int. J., vol. 22, no. 1, pp. 21–30, 2006.

T. Conti, Building total quality: A guide for management. Springer Science & Business Media, 2012.

M. M. Ulkhaq, S. N. W. Pramono, and Rifki Halim, “Aplikasi seven tools untuk mengurangi cacat produk pada Mesin Communite di PT. Masscom Graphy, Semarang,†J. PASTI, vol. 11, no. 3, pp. 220–230, 2017.

M. M. Ulkhaq and D. R. Rasyida, “Aplikasi Seven Tools dan Analisis 5w+ 1h untuk Mengurangi Cacat Produk Galon: Studi Kasus di PT. Berlina, Tbk,†Pros. Semin. Nas. Multi Disiplin Ilmu Call Pap. UNISBANK Ke-2, pp. 330–338, 2016.

M. Damaindra and A. S. Cahyana, “Peningkatan kualitas produk pada mesin produksi Nonwoven Spunbond dengan menggunakan metode seven tools dan FMEA,†Spektrum Ind., vol. 15, no. 2, pp. 245–255, 2017.

J. H. Heizer and B. Render, Operation Management, 10th edition. Upper Saddle River, NJ: Prentice Hall, 2011.

J. E. Ross, Total quality management: Text, cases, and readings. Routledge, 2017.

D. H. Besterfield, Total Quality Management, 3rd edition. New York: Pearson Education, Inc., 2003.

A. Mitra, Fundamentals of quality control and improvement. New York: Springer Publishing Company, 2016.

V. M. Magar and V. B. Shinde, “Application of 7 quality control (7 QC) tools for continuous improvement of manufacturing processes,†Int. J. Eng. Res. Gen. Sci., vol. 2, no. 4, pp. 364–371, 2014.

J. J. Gunther and F. Hawkins, Making TQM work: Quality tools for human service organizations. Springer Publishing Company, 1999.

P. Qiu, Introduction to statistical process control. Chapman and Hall/CRC, 2013.

D. C. Montgomery and G. C. Runger, Applied statistics and probability for engineers. River Street, Hoboken: John Wiley & Sons, 2010.

D. L. Goetsch and S. B. Davis, Quality management for organizational excellence. Upper Saddle River, NJ: Pearson, 2014.

J. J. Dahlgaard, G. K. Khanji, and K. Kristensen, Fundamentals of total quality management. Routledge, 2008.

G. Ilie and C. N. Ciocoiu, “Application of fishbone diagram to determine the risk of an event with multiple causes,†Manag. Res. Pract., vol. 2, no. 1, pp. 1–20, 2010.

N. R. Tague, The quality toolbox, vol. 600. ASQ Quality Press Milwaukee, WI, 2005.

Downloads

Published

2018-12-24

Issue

Section

Articles

How to Cite

[1]
“Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller”, j. sist. manaj. ind., vol. 2, no. 2, pp. 59–66, Dec. 2018, doi: 10.30656/jsmi.v2i2.681.

Similar Articles

1-10 of 61

You may also start an advanced similarity search for this article.