Layout improvement design to reduce material handling cost by using the systematic layout planning method in the MSME industry

Inaki Maulida Hakim; Durra Salsabila; Keval Priapratama Prajadhiana

doi:10.30656/jsmi.v9i1.9212

Authors

Inaki Maulida Hakim Universitas Indonesia https://orcid.org/0000-0001-6298-1850
Durra Salsabila Universitas Indonesia
Keval Priapratama Prajadhiana Universiti Teknologi MARA

DOI:

https://doi.org/10.30656/jsmi.v9i1.9212

Keywords:

Layout, Material handling cost, MSMEs skin crackers, Systematic layout planning

Abstract

This research discusses layout improvements in MSMEs that produce skin crackers distributed in the Jabotabek area. Currently, the quantity of skin crackers produced is experiencing problems. One of the causes of problems is that material handling is still manual, poor layout settings, limited costs, unpredictable weather and lack of labor availability. Poor material handling causes long production duration, workers are less safe and comfortable, and material handling costs are high. Therefore, this research improved the layout by improving the material handling process. The research aims to analyze the existing layout problems, improve the layout, and compare the existing layout with the proposed layout. The method used to improve the layout is systematic layout planning (SLP). The results of the study are that material handling costs reduced by IDR 256,754.99 or 67.8%, increasing capacity by 17.77 kg per week can solve stock shortages, and the duration of material handling is reduced by 28.95 minutes per day or 69.19%.

Downloads

Download data is not yet available.

References

[1] R. Roy and G. S. Dangayach, “Measuring productivity and material handling cost reduction,” Int. J. Bus. Syst. Res., vol. 9, no. 3, p. 214, 2015, doi: https://doi.org/10.1504/IJBSR.2015.071820.

[2] A. M. Qamar, O. T. Meanazel, A. H. Alalawin, and H. A. Almomani, “Optimization of Plant Layout in Jordan Light Vehicle Manufacturing Company,” J. Inst. Eng. Ser. C, vol. 101, no. 4, pp. 721–728, Aug. 2020, doi: https://doi.org/10.1007/s40032-020-00576-5.

[3] S. A. Ali Naqvi, M. Fahad, M. Atir, M. Zubair, and M. M. Shehzad, “Productivity improvement of a manufacturing facility using systematic layout planning,” Cogent Eng., vol. 3, no. 1, p. 1207296, Dec. 2016, doi: https://doi.org/10.1080/23311916.2016.1207296.

[4] J. Laurent, L. Gozali, R. Farrel, and C. O. Doaly, “Production Layout Replanning Using Systematical Layout Planning with Shared Storage Method Analysis and Flexsim Simulation in Garment and Textile Company,” in Proceedings of the International Conference on Industrial Engineering and Operations Management, Michigan, USA: IEOM Society International, 2022, pp. 2159–2171. doi: https://doi.org/10.46254/AN12.20220377.

[5] B. Suhardi, E. Juwita, and R. D. Astuti, “Facility layout improvement in sewing department with Systematic Layout planning and ergonomics approach,” Cogent Eng., vol. 6, no. 1, p. 1597412, Jan. 2019, doi: https://doi.org/10.1080/23311916.2019.1597412.

[6] B. Suhardi, L. Elvira, and R. D. Astuti, “Facility Layout Redesign Using Systematic Layout Planning Method in PT. Pilar Kekar Plasindo,” J. Technol. Oper. Manag., vol. 16, no. 1, pp. 57–68, Jul. 2021, doi: https://doi.org/10.32890/jtom2021.16.1.5.

[7] S. S. Salins, S. A. R. Zaidi, D. Deepak, and H. K. Sachidananda, “Design of an improved layout for a steel processing facility using SLP and lean Manufacturing techniques,” Int. J. Interact. Des. Manuf., vol. 18, no. 6, pp. 3827–3848, Aug. 2024, doi: https://doi.org/10.1007/s12008-024-01828-9.

[8] Y. Ojaghi, A. Khademi, N. M. Yusof, N. G. Renani, and S. A. H. bin S. Hassan, “Production Layout Optimization for Small and Medium Scale Food Industry,” Procedia CIRP, vol. 26, pp. 247–251, 2015, doi: https://doi.org/10.1016/j.procir.2014.07.050.

[9] A. Nabila, M. I. H. Umam, A. Suherman, V. Devani, and M. R. Nazaruddin, “Layout Redesign Using Compiterized Relative Allocation of Facilities Techniques (CRAFT) Algorithm Method (Case Study: PCL Company),” in Proceedings of the International Conference on Industrial Engineering and Operations Management, Michigan, USA: IEOM Society International, 2022, pp. 1580–1590. doi: https://doi.org/10.46254/SA03.20220320.

[10] S. Barnwal and P. Dharmadhikari, “Optimization of plant layout using SLP method,” Int. J. Innov. Res. Sci. Eng. Technol., vol. 5, no. 3, 2016, [Online]. Available: https://www.ijirset.com/upload/2016/march/46_Optimization.pdf

[11] A. Shahin and M. Poormostafa, “Facility Layout Simulation and Optimization: an Integration of Advanced Quality and Decision Making tools and Techniques,” Mod. Appl. Sci., vol. 5, no. 4, p. 95, Aug. 2011, doi: https://doi.org/10.5539/mas.v5n4p95.

[12] M. R. Hossain, M. K. Rasel, and S. Talapatra, “Increasing productivity through facility layout improvement using systematic layout planning pattern theory,” Glob. J. Res. Eng., vol. 14, no. 7, pp. 71–76, 2014, [Online]. Available: https://engineeringresearch.org/index.php/GJRE/article/view/1269

[13] Q.-L. Lin, H.-C. Liu, D.-J. Wang, and L. Liu, “Integrating systematic layout planning with fuzzy constraint theory to design and optimize the facility layout for operating theatre in hospitals,” J. Intell. Manuf., vol. 26, no. 1, pp. 87–95, Feb. 2015, doi: https://doi.org/10.1007/s10845-013-0764-8.

[14] S. Jain and T. K. Yadav, “Systematic layout planning: A review of improvement in approach to pulse processing mills,” Int. Res. J. Eng. Technol., vol. 4, no. 5, pp. 503–507, 2017, [Online]. Available: https://www.irjet.net/archives/V4/i5/IRJET-V4I599.pdf

[15] J. Gómez, A. Tascón, and F. Ayuga, “Systematic layout planning of wineries: the case of Rioja region (Spain),” J. Agric. Eng., vol. 49, no. 1, pp. 34–41, Apr. 2018, doi: https://doi.org/10.4081/jae.2018.778.

[16] I. F. Febriandini and Yuniaristanto, “Re-design Facility Layout using Systematic Layout Planning Method: A Case Study : Biopro Cosmeceutical Sdn. Bhd.,” IOP Conf. Ser. Mater. Sci. Eng., vol. 495, no. 1, p. 012027, Jun. 2019, doi: https://doi.org/10.1088/1757-899X/495/1/012027.

[17] L. Gozali, L. Widodo, S. R. Nasution, and N. Lim, “Planning the New Factory Layout of PT Hartekprima Listrindo using Systematic Layout Planning (SLP) Method,” IOP Conf. Ser. Mater. Sci. Eng., vol. 847, no. 1, p. 012001, Apr. 2020, doi: https://doi.org/10.1088/1757-899X/847/1/012001.

[18] U. Khasanah, A. P. Sutarto, and N. Izzah, “Work Facilities Improvement Using Systematic Layout Planning to Reduce the Risk of Manual Handling,” J. Nov. Eng. Sci. Technol., vol. 1, no. 01, pp. 15–23, Aug. 2022, doi: https://doi.org/10.56741/jnest.v1i01.56.

[19] V. Kumar and V. N. Malleswari, “Improvement of facility layout design using Systematic Layout planning methodology,” J. Phys. Conf. Ser., vol. 2312, no. 1, p. 012089, Aug. 2022, doi: https://doi.org/10.1088/1742-6596/2312/1/012089.

[20] X. Hu and Y.-F. Chuang, “E-commerce warehouse layout optimization: systematic layout planning using a genetic algorithm,” Electron. Commer. Res., vol. 23, no. 1, pp. 97–114, Mar. 2023, doi: https://doi.org/10.1007/s10660-021-09521-9.

[21] J. Mao, J. Cheng, X. Li, H. Zhao, and D. Yu, “Simulation of Low Carbon Layout Optimization of Disassembly Line Based on SLP Method,” Sustainability, vol. 15, no. 6, p. 5241, Mar. 2023, doi: https://doi.org/10.3390/su15065241.

[22] R. Muther and L. Hales, Systematic Layout Planning. United States of America: Management & Industrial Research Publications, 2015. [Online]. Available: https://richardmuther.com/wp-content/uploads/2016/07/Systematic-Layout-Planning-SLP-4th-edition-soft-copy.pdf

[23] V. Deshpande, N. D. Patil, V. Baviskar, and J. Gandhi, “Plant layout optimization using CRAFT and ALDEP methodology,” Product. J. by Natl. Product. Counc., vol. 57, no. 1, pp. 32–42, 2016, [Online]. Available: https://www.researchgate.net/publication/318743771

[24] C. Mgbemena, I. N. Okafor, and B. U. Oreko, “Improving Capacity Utilisation in Bread Processing Factories Using the BLOCPLAN Algorithm,” Int. J. Ind. Prod. Eng., vol. 2, no. 2, pp. 1–16, 2024, [Online]. Available: https://journals.unizik.edu.ng/ijipe/article/view/3551

[25] M. Faishal and M. A. Pratama, “Reducing Waste of Material Transport in Manufacturing Facility using Systematic Layout Planning and Simulation Approach,” ASM Sci. J, vol. 16, pp. 134–142, 2021, [Online]. Available: https://www.akademisains.gov.my/asmsj/?mdocs-file=6696

[26] P. Mallick, K. Muduli, J. N. Biswal, J. Pumwa, and P. Oyekola, “Development of a Suitable Plant Layout using Computerised Relative Allocation of Facility Techniques,” Int. J. Recent Technol. Eng., vol. 8, no. 2, pp. 4956–4961, Jul. 2019, doi: https://doi.org/10.35940/ijrte.B1070.078219.

[27] H. Nasution, I. Budiman, and A. Salim, “The cost analysis of material handling in Chinese traditional praying paper production plant,” IOP Conf. Ser. Mater. Sci. Eng., vol. 309, no. 1, p. 012044, Feb. 2018, doi: https://doi.org/10.1088/1757-899X/309/1/012044.

[28] U. Tarigan, A. Ishak, N. A. Fabiola, N. Sembiring, K. Syahputri, and U. P. P. Tarigan, “Proposed improvement of production floor layout using urban algorithm in minimizing the cost of material handling (Case study of rubber wood processing factory),” IOP Conf. Ser. Mater. Sci. Eng., vol. 1122, no. 1, p. 012062, Mar. 2021, doi: https://doi.org/10.1088/1757-899X/1122/1/012062.

[29] J. M. Apple, Plant layout and material handling. United States of America: John Wiley & Sons, Inc., 1963. [Online]. Available: https://books.google.co.id/books?id=VQJUAAAAMAAJ&q

[30] H. Imanullah, H. Heryani, and A. Nugroho, “Analysis of Bread Production Facilities Layout using BLOCPLAN Algorithm,” Ind. J. Teknol. dan Manaj. Agroindustri, vol. 10, no. 2, pp. 172–181, Aug. 2021, doi: https://doi.org/10.21776/ub.industria.2021.010.02.8.