Integration of lean and green manufacturing to speed up the automotive parts production process for sustainability orders from customers

Hibarkah Kurnia; Asep Arwan Sulaeman; Vebina Sheila Pasha

Authors

Hibarkah Kurnia Universitas Pelita Bangsa https://orcid.org/0000-0002-1263-230X
Asep Arwan Sulaeman Universitas Pelita Bangsa https://orcid.org/0009-0003-1789-563X
Vebina Sheila Pasha Universitas Mercu Buana

Keywords:

Green manufacturing, Just in time, kanban system, Lean manufacturing, Sustainability

Abstract

Fulfilling orders from the automotive industry customers is a necessity. Problems arising from product delivery to customers are due to production delays, decreased production yields, and environmental pollution caused by production waste. The production process often experiences wasted time producing four-wheeled vehicle spare parts and a high percentage of production defects. This research aims to reduce production process time, provide solutions to reduce waste, and balance production stock according to customer orders. This research uses the Lean Manufacturing (LM) approach with the Value Stream Mapping (VSM) method combined with the Green Manufacturing (GM) approach with the Just in Time (JIT) and Kanban methods. This research resulted in the production process time for four-wheeled vehicle spare parts decreasing from 11.0 days to 4.5 days, meaning a decrease of 159%. It affected production results, increasing from average monthly production of 42,917 pcs to 59,990 pcs, meaning an increase of 128%. Meanwhile, the shipment plan target has been achieved at 96% of the plan order. Meanwhile, Turn Over Inventory (TOI) results are under 30 days, so customer order continuity exists.

Downloads

Download data is not yet available.

References

I. Zulkarnaen, H. Kurnia, B. Saing, A. Apriyani, and A. Nuryono, 'Reduced painting defects in the 4-wheeled vehicle industry on product type H-1 using the lean six sigma-DMAIC approach', J. Sist. dan Manaj. Ind., vol. 7, no. 2, pp. 179–192, Dec. 2023, doi: https://doi.org/10.30656/jsmi.v7i2.7512.

H. Kurnia, S. Suhendra, H. Manurung, and K. B. Juliantoro, 'Implementation of Lean Service Approaches to Improve Customer Satisfaction and Sustainability of Health Equipment Procurement Process at Hospitals', Qual. Innov. Prosper., vol. 27, no. 3, pp. 1–17, Dec. 2023, doi: https://doi.org/10.12776/qip.v27i3.1875.

H. H. Purba, Mukhlisin, and S. Aisyah, 'Productivity improvement picking order by appropriate method, value stream mapping analysis, and storage design: A case study in automotive part center', Manag. Prod. Eng. Rev., vol. 9, no. 1, pp. 71–81, 2018, doi: https://doi.org/10.24425/119402.

M. Iranmanesh, S. Zailani, S. S. Hyun, M. H. Ali, and K. Kim, 'Impact of Lean Manufacturing Practices on Firms' Sustainable Performance: Lean Culture as a Moderator', Sustainability, vol. 11, no. 4, p. 1112, Feb. 2019, doi: https://doi.org/10.3390/su11041112.

C. P. Carvalho, D. S. Carvalho, and M. B. Silva, 'Value stream mapping as a lean manufacturing tool: A new account approach for cost saving in a textile company', Int. J. Prod. Manag. Eng., vol. 7, no. 1, p. 1, Jan. 2019, doi: https://doi.org/10.4995/ijpme.2019.8607.

F. Pomalia, I. Iftadi, and R. D. Astuti, 'Waste analysis of fuselage assembly in panelization group of the 117th NC212i aircraft', J. Sist. dan Manaj. Ind., vol. 4, no. 1 SE-Research Article, pp. 61–71, Jul. 2020, doi: https://doi.org/10.30656/jsmi.v4i1.2187.

Y. El Kihel, A. El Kihel, and S. Embarki, 'Optimization of the Sustainable Distribution Supply Chain Using the Lean Value Stream Mapping 4.0 Tool: A Case Study of the Automotive Wiring Industry', Processes, vol. 10, no. 9, p. 1671, Aug. 2022, doi: https://doi.org/10.3390/pr10091671.

B. Martins et al., 'Implementation of a Pull System – A Case Study of a Polymeric Production System for the Automotive Industry', Manag. Syst. Prod. Eng., vol. 29, no. 4, pp. 253–259, Dec. 2021, doi: https://doi.org/10.2478/mspe-2021-0031.

G. Narayanamurthy, A. Gurumurthy, and A. A. Lankayil, 'Experience of implementing lean thinking in an Indian healthcare institution', Int. J. Lean Six Sigma, vol. 12, no. 1, pp. 23–60, Feb. 2021, doi: https://doi.org/10.1108/IJLSS-10-2016-0062.

K. S and B. K. M, 'Implementation of lean tools and techniques in an ethical papers production industry', J. Sist. dan Manaj. Ind., vol. 5, no. 2, pp. 63–73, Nov. 2021, doi: https://doi.org/10.30656/jsmi.v5i2.3611.

Ganjar Sidik Gandara, Riko Muri, and Humiras Hardi Purba, 'Increase Service Selling of Formaldehyde Products By Implementing Quality Function Deployment (QFD)', J. Appl. Res. Ind. Eng., vol. 6, no. 3, pp. 219–231, 2019, doi: https://doi.org/10.22105/jarie.2019.192932.1095.

M. M. Narke and C. T. Jayadeva, ‘Value Stream Mapping: Effective Lean Tool for SMEs’, Mater. Today Proc., vol. 24, no. 2, pp. 1263–1272, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.441.

E. Amrina and R. Andryan, 'Assessing Wastes in Rubber Production Using Lean Manufacturing: A Case Study', in 2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), IEEE, Apr. 2019, pp. 328–332. doi: https://doi.org/10.1109/IEA.2019.8714925.

F. Abu, H. Gholami, M. Z. Mat Saman, N. Zakuan, and D. Streimikiene, 'The implementation of lean manufacturing in the furniture industry: A review and analysis on the motives, barriers, challenges, and the applications', J. Clean. Prod., vol. 234, pp. 660–680, 2019, doi: https://doi.org/10.1016/j.jclepro.2019.06.279.

G. N. T. Purnama and S. Hasibuan, 'Implementation of sustainable manufacturing in Indonesia paint industry based on triple bottom line', in Proceedings of the International Conference on Industrial Engineering and Operations Management, 2021, pp. 3923–3932, doi: https://doi.org/10.46254/AN11.20210708.

R. Salvador, C. M. Piekarski, and A. C. de Francisco, 'Approach of the Two-way Influence Between Lean and Green Manufacturing and its Connection to Related Organisational Areas', Int. J. Prod. Manag. Eng., vol. 5, no. 2, p. 73, Jul. 2017, doi: https://doi.org/10.4995/ijpme.2017.7013.

M. Kholil, Hendri, B. Hanum, and R. Setiawan, 'Using 7 waste approach and VSM method to improve the efficiency of mackerel fish crackers production time at small medium enterprise (SME)', Proc. Int. Conf. Ind. Eng. Oper. Manag., vol. 2018–March, pp. 2819–2826, 2018, doi: https://doi.org/10.46254/AN08.20180657.

Z. F. Ikatrinasari, S. Hasibuan, and K. Kosasih, 'The Implementation Lean and Green Manufacturing through Sustainable Value Stream Mapping', IOP Conf. Ser. Mater. Sci. Eng., vol. 453, no. 1, p. 012004, Nov. 2018, doi: https://doi.org/10.1088/1757-899X/453/1/012004.

H. Kurnia, I. Setiawan, and H. Hernadewita, 'Integration of Lean and Green Manufacturing to Reduce Waste in the Employee Recruitment Process in the Manufacturing Industry in Indonesia', J. Rekayasa Sist. Ind., vol. 11, no. 2, pp. 145–156, Oct. 2022, doi: https://doi.org/10.26593/jrsi.v11i2.5608.145-156.

B. Al Kurdi, M. Alshurideh, and A. Alnaser, 'The impact of employee satisfaction on customer satisfaction: Theoretical and empirical underpinning', Manag. Sci. Lett., vol. 10, no. 2, pp. 3561–3570, 2020, doi: https://doi.org/10.5267/j.msl.2020.6.038.

S. Azarine and M. Yolanda, 'Effect of E-Service Quality and E-Trust on Customer E-Repurchase Intention and Customer E-Satisfaction as Intervening Variable (Case Study: Shopee Users) Shalsabilla', J. Small Mediu. Enterp., vol. 1, no. 1, pp. 16–27, 2022, [Online]. Available: https://jsme.ppj.unp.ac.id/index.php/jsme/article/view/8.

S. Choudhary, R. Nayak, M. Dora, N. Mishra, and A. Ghadge, 'An integrated lean and green approach for improving sustainability performance: a case study of a packaging manufacturing SME in the U.K.', Prod. Plan. Control, vol. 30, no. 5–6, pp. 353–368, Apr. 2019, doi: https://doi.org/10.1080/09537287.2018.1501811.

M. Mohan Prasad, J. M. Dhiyaneswari, J. Ridzwanul Jamaan, S. Mythreyan, and S. M. Sutharsan, 'A framework for lean manufacturing implementation in Indian textile industry', Mater. Today Proc., vol. 33, pp. 2986–2995, Jan. 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.979.

K. Kuncorosidi, R. Amelia, and D. W. Apriandi, 'Lean Hospital Simulation Using The Value Stream Mapping ( VSM ) Method', J. Ris. Bisnis dan Manaj. Tirtayasa, vol. 7, no. 2, pp. 48–63, 2023, [Online]. Available: https://jurnal.untirta.ac.id/index.php/JRBM/article/view/23239.

A. Abdullah, S. Saraswat, and F. Talib, 'Impact of Smart, Green, Resilient, and Lean Manufacturing System on SMEs'Performance: A Data Envelopment Analysis (DEA) Approach', Sustainability, vol. 15, no. 2, p. 1379, Jan. 2023, doi: https://doi.org/10.3390/su15021379.

M. Fiorello, B. Gladysz, D. Corti, M. Wybraniak-Kujawa, K. Ejsmont, and M. Sorlini, 'Towards a smart lean green production paradigm to improve operational performance', J. Clean. Prod., vol. 413, no. 12, p. 137418, Aug. 2023, doi: https://doi.org/10.1016/j.jclepro.2023.137418.

X. Zhu, Y. Liang, Y. Xiao, G. Xiao, and X. Deng, 'Identification of Key Brittleness Factors for the Lean–Green Manufacturing System in a Manufacturing Company in the Context of Industry 4.0, Based on the DEMATEL-ISM-MICMAC Method', Processes, vol. 11, no. 2, p. 499, Feb. 2023, doi: https://doi.org/10.3390/pr11020499.

C. Jaqin, H. Kurnia, H. H. Purba, T. D. Molle, and S. Aisyah, 'Lean concept to reduce waste of process time in the plastic injection industry in Indonesia', Niger. J. Technol. Dev., vol. 20, no. 2, pp. 73–82, Oct. 2023, doi: https://doi.org/10.4314/njtd.v20i2.1396.

I. Elemure, H. N. Dhakal, M. Leseure, and J. Radulovic, ‘Integration of Lean Green and Sustainability in Manufacturing: A Review on Current State and Future Perspectives’, Sustainability, vol. 15, no. 13, p. 10261, Jun. 2023, doi: https://doi.org/10.3390/su151310261.

I. A. Ningsih, D. Almasdy, and A. H. B. Adi, 'Evaluation and Development of Annual Drug Provides Planning at the Riau Islands Province Pharmaceutical Installation', J. Optimasi Sist. Ind., vol. 18, no. 2, pp. 97–106, Oct. 2019, doi: https://doi.org/10.25077/josi.v18.n2.p97-106.2019.

A. Yusuf and D. Soediantono, 'Supply chain management and recommendations for implementation in the defense industry: a literature review', Int. J. Soc. Manag. Stud., vol. 3, no. 3, pp. 63–77, 2022, [Online]. Available: https://www.ijosmas.org/index.php/ijosmas/article/view/142.

M. M. Uddin, 'Improving Product Quality and Production Yield in Wood Flooring Manufacturing Using Basic Quality Tools', Int. J. Qual. Res., vol. 15, no. 1, pp. 155–170, Jan. 2021, doi: https://doi.org/10.24874/IJQR15.01-09.

A. N. M. Rose, N. M. Z. N. Mohamed, F. F. Ab Rashid, M, H. M. Noor, and A. Mohd, 'Improving productivity through value stream mapping (VSM): A case study at electrical & electronic company', J. Phys. Conf. Ser., vol. 1532, no. 1, p. 012005, Jun. 2020, doi: https://doi.org/10.1088/1742-6596/1532/1/012005.

S. F. Fam, N. Ismail, H. Yanto, D. D. Prastyo, and B. P. Lau, 'Lean manufacturing and overall equipment efficiency (OEE) in paper manufacturing and paper products industry', J. Adv. Manuf. Technol., vol. 12, no. 1, pp. 461–474, 2018, [Online]. Available: https://jamt.utem.edu.my/jamt/article/view/4305.

A. Abugabah, N. Nizamuddin, and A. Abuqabbeh, 'A review of challenges and barriers implementing RFID technology in the Healthcare sector', Procedia Comput. Sci., vol. 170, pp. 1003–1010, 2020, doi: https://doi.org/10.1016/j.procs.2020.03.094.

K. Siregar, F. Ariani, and M. M. Tambunan, 'Reducing Waste in Spare Part Production Process with Lean Manufacturing Approach', IOP Conf. Ser. Mater. Sci. Eng., vol. 648, no. 1, p. 012016, Oct. 2019, doi: https://doi.org/10.1088/1757-899X/648/1/012016.

H. Tannady, E. Gunawan, F. Nurprihatin, and F. Wilujeng, 'Process improvement to reduce waste in the biggest instant noodle manufacturing company in South East Asia', J. Appl. Eng. Sci., vol. 17, no. 2, pp. 203–212, 2019, doi: https://doi.org/10.5937/jaes17-18951.

W. A. Santosa and M. Sugarindra, 'Implementation of lean manufacturing to reduce waste in production line with value stream mapping approach and Kaizen in division sanding upright piano, case study in: PT. X’, MATEC Web Conf., vol. 154, p. 01095, Feb. 2018, doi: https://doi.org/10.1051/matecconf/201815401095.

S. Zahoor and W. A. Kader, 'A Combined VSM and Kaizen Approach for Sustainable Continuous Process Improvement', Int. J. Ind. Eng. Oper. Manag., vol. 1, no. 2, pp. 125–137, 2019, [Online]. Available: https://www.ieomsociety.org/journals/ijieom/vol-1-no-2-3.pdf.

H. Rifqi, A. Zamma, S. Ben Souda, and M. Hansali, 'Lean Manufacturing Implementation through DMAIC Approach: A Case Study in the Automotive Industry', Qual. Innov. Prosper., vol. 25, no. 2, pp. 54–77, Jul. 2021, doi: https://doi.org/10.12776/qip.v25i2.1576.

B. Romeira, F. Cunha, and A. Moura, 'Development and Application of an e-Kanban System in the Automotive Industry', Int. Conf. Ind. Eng. Oper. Manag., pp. 613–624, 2021, doi: https://doi.org/10.46254/NA06.20210101.

J. Rodrigues, J. C. V. De Sá, L. P. Ferreira, F. J. G. Silva, and G. Santos, ‘Lean Management “Quick-Wins”: Results of Implementation. A Case Study', Qual. Innov. Prosper., vol. 23, no. 3, pp. 3–21, Nov. 2019, doi: https://doi.org/110.12776/qip.v23i3.1291.

H. Kurnia, I. Setiawan, and Hernadewita, 'Integration of Lean and Green Manufacturing to reduce Process Waste and Employee Recruitment Paper Waste in the Manufacturing Industry in Indonesia', J. Rekayasa Sist. Ind., vol. 11, no. 2, pp. 145–156, 2022, doi: https://doi.org/10.26593/jrsi.v11i2.5608.

L. Canales-Jeri, V. Rondinel-Oviedo, A. Flores-Perez, and M. Collao-Diaz, 'Lean model applying JIT, Kanban, and Standardized work to increase the productivity and management in a textile SME.', in 2022 The 3rd International Conference on Industrial Engineering and Industrial Management, New York, NY, USA: ACM, Jan. 2022, pp. 79–84. doi: https://doi.org/110.1145/3524338.3524351.