Analisa Pengaruh Pengaturan Kerja Operator Terhadap Pencapaian Keluaran Produksi

Qomarotun Nurlaila

doi:10.30656/jsmi.v1i1.172

Authors

Qomarotun Nurlaila Universitas Riau Kepulauan

DOI:

https://doi.org/10.30656/jsmi.v1i1.172

Keywords:

Work Settings, Human Resources, Output Variations

Abstract

PT. XYZ is a manufacturing company that produces the constituent components of HDD (Hard Disk Drive) products. One of the products produced by PT. XYZ made from rubber. The product has a strict specification, both for the accuracy of size and for display. One of the problems faced by PT. XYZ is the output of a 100% unstable check section even though the amount of human resources used is the same every day. There is a variation of the output / clock / operator from 650 to 714.4 pieces. This study aims to analyze the cause of the variation of output / hour / operator and to find solutions to minimize the output variation. The result of this research can be concluded that the cause of variation of output / hour / operator is the number of product type checked by operator not always the same every day. Where more and more types of products are checked then the smaller the output on that day. To get maximum results then the operator only do one type of product every day. If not possible then cultivated to a minimum operator change the type of product checked. It requires expertise from the supervisor to manage the work of the operator in an effort to get the maximum output.

References

Budiasih, Y. (2012). Struktur Organisasi, Desain Kerja, Budaya Organisasi dan Pengaruhnya Terhadap Produktivitas Karyawan Studi kasus pada PT . XX di Jakarta. Jurnal Liquidity, 1(2), 99–105.

Dunggio, M. (2013). Semangat Dan Disiplin Kerja Terhadap Produktivitas Kerja Karyawan Pada PT. Jasa Raharja (Persero) Cabang Sulawesi Utara. Jurnal EMBA, 1(4), 523–533.

Hakim, A. K. (2011). Pengaruh Kompensasi dan Motivasi Terhadap Produktivitas Kerja Pegawai. Jurnal Manajemen Dan Bisnis. Vol.11, No.02, 11(2), 170–184.

Ilman, A., & Helianty, Y. (2013). Rancangan Perbaikan Sistem Kerja dengan Metode Quick Exposure Check ( QEC ) di Bengkel Sepatu X di Cibaduyut. Jurnal Online Institut Teknologi Nasional, 1(2), 120–128.

Kristanto, A., & Manopo, R. (2010). Perancangan Ulang Fasilitas Kerja Pada Stasiun Cutting yang Ergonomis Guna Memperbaiki Produktivitas Kerja. Jurnal Informatika, 4(20, 467–479.

Kusmindari, D., & Aprianto, A. (2009). Produktivitas dan Pengukuran Kerja Proses Produksi Medium Dencity Fibreboard (MDF). Jurnal Ilmiah Tekno, 6(2), 85–96.

Maringan, K., Pongtuluran, Y., & Maria, S. (2017). Pengaruh tingkat pendidikan, sikap kerja dan keterampilan kerja terhadap prestasi kerja karyawan pt. wahana sumber lestari samarinda. AKUNTABEL, 13(2), 135–150.

Munandar, M. R. (2014). Pengaruh Keselamatn, Kesehatan Kerja dan Intensif Terhadap Motivasi dan Kinerja Karyawan (Studi Pada Pekerja Bagian Produksi PT. Sekawan karyartama Mandiri Sidoarjo). Jurnal Administrasi Bisnis, 9(1), 1–9.

Prabowo, B. P. S. (2016). Pengaruh tingkat pendidikan dan Penempatan terhadap Produktivitas Kerja Karyawan pada PT. Industri Kapal Indonesia, Bitung. Jurnal Berkala Ilmiah Efisiensi, 16(4), 738–751.

Syafii, M. (2015). Pengaruh Kepemimpinan, Job Descrition dan Kepuasan Kerja Karyawan Terhadap Produktifitas Kerja Karyawan Pada UD. Anak Agung Sedayu. Gema Ekonomi, 4(2), 126–141.