Perancangan Alat Bantu untuk Liquid Container Berdasarkan Penilaian Rapid Entire Body Assessment dan Washington State Checklist

Authors

  • Risya Rahmasari Kosasih Telkom University
  • Sri Martini Telkom University
  • Mira Rahayu Telkom University

DOI:

https://doi.org/10.30656/jsmi.v3i1.1459

Keywords:

Material Handling, Liquid Container, Musculoskeletal Disorders (MSDs), Rapid Entire Body Assessment (REBA), Washington State Checklist (WSC)

Abstract

The problem in this research is the use of liquid containers, which use as bulk cosmetic containers, which will be move from the WIP room to the product packaging room. Based on these transfer activities, there was a risk of exposure to Musculoskeletal Disorders (MSDs), which were analyzed using Rapid Entire Body Assessment (REBA) and Washington State Checklist (WSC). This study aims to design a tool for a more ergonomic liquid container to reduce the impact of MSDs on workers. Redesigning this tool uses the concept of Reverse Engineering. The design of the new liquid container transporter simulation can reduce REBA score with a WSC value of low-risk category for MSDs exposure based on the overall work environment category.

References

[1] G. B. B. Vieira, G. S. Pasa, M. B. N. do O. Borsa, G. S. Milan, and A. Pandolfo, “Materials Handling Management: A Case Study,†J. Oper. Supply Chain Manag., vol. 4, no. 2, pp. 19–30, Dec. 2011, doi: 10.12660/joscmv4n2p19-30.

[2] M. Gentzler and S. Stader, “Posture stress on firefighters and emergency medical technicians (EMTs) associated with repetitive reaching, bending, lifting, and pulling tasks,†Work, vol. 37, no. 3, pp. 227–239, 2010, doi: 10.3233/WOR-2010-1075.

[3] S. Drisya, B. B. Das, and R. Parida, “Ergonomic Evaluation of Bar Benders in Construction Industry,†Singapore: Springer, 2018, doi: 10.1007/978-981-10-5457-0_6.

[4] S. Hignett and L. McAtamney, “Rapid Entire Body Assessment (REBA),†Appl. Ergon., vol. 31, no. 2, pp. 201–205, Apr. 2000, doi: 10.1016/S0003-6870(99)00039-3.

[5] A. Coyle, “Comparison of the Rapid Entire Body Assessment and the New Zealand Manual Handling’Hazard Control Record’, for assessment of manual handling hazards in the supermarket industry,†Work, vol. 24, no. 2, pp. 111–116, 2005. available at: https://content.iospress.com/articles/work/wor00408.

[6] Ontario Health and Safety Associations, MSD Prevention Toolbox: More on Ind-depth Risk Assessment Methods. Ontario: OHSCO, 2010, available at: https://www.whsc.on.ca/Files/Resources/Ergonomic-Resources/MSD-Prevention-Toolbox-Part-C-In-Depth-Risk-Assess.aspx.

[7] V. Raja and K. J. Fernandes, Reverse engineering: an industrial perspective. London: Springer Science & Business Media, 2007, available at: Google Scholar.

[8] D. Tang, R. Zhu, X. Chen, T. Zang, and R. Xu, “Functional Reverse Engineering for Re-creation Design,†in Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, Springer, 2010, pp. 185–195. doi: 10.1007/978-3-642-10430-5_14.

[9] Y.-J. Chang, T. D. Nguyen, M. Finkbeiner, and J. Krüger, “Adapting Ergonomic Assessments to Social Life Cycle Assessment,†Procedia CIRP, vol. 40, pp. 91–96, 2016, doi: 10.1016/j.procir.2016.01.064.

[10] K. N. Otto and K. L. Wood, “Product Evolution: A Reverse Engineering and Redesign Methodology,†Res. Eng. Des., vol. 10, no. 4, pp. 226–243, Dec. 1998, doi: 10.1007/s001639870003.

[11] X. Sun, R. Houssin, J. Renaud, and M. Gardoni, “A review of methodologies for integrating human factors and ergonomics in engineering design,†Int. J. Prod. Res., pp. 1–16, 2018, doi: 10.1080/00207543.2018.1492161.

[12] G. Salvendy, Handbook of human factors and ergonomics. New Jersey: John Wiley & Sons, 2012, available at: Google Scholar.

[13] E. Grandjean and K. H. E. Kroemer, Fitting the task to the human: a textbook of occupational ergonomics. Philadelphia: CRC press, 1997, available at: Google Scholar.

[14] N. Sultana, M. A. H. Mian, and M. G. Rubby, “Risk and Exposure of Musculoskeletal Disorders among Dental Surgeons Working in Dhaka City,†Updat. Dent. Coll. J., vol. 9, no. 1, pp. 3–7, Apr. 2019, doi: 10.3329/updcj.v9i1.41199.

[15] I. Dianat, J. Molenbroek, and H. I. Castellucci, “A review of the methodology and applications of anthropometry in ergonomics and product design,†Ergonomics, vol. 61, no. 12, pp. 1696–1720, Dec. 2018, doi: 10.1080/00140139.2018.1502817.

[16] D. K. Kushwaha and P. V Kane, “Ergonomic assessment and workstation design of shipping crane cabin in steel industry,†Int. J. Ind. Ergon., vol. 52, pp. 29–39, Mar. 2016, doi: 10.1016/j.ergon.2015.08.003.

[17] T. Lin, A. Ekanayake, L. S. Gaweshan, and Z. A. Hasan, “Ergonomics product development of over bed table for bedridden patients,†Comput. Aided. Des. Appl., vol. 13, no. 4, pp. 538–548, Jul. 2016, doi: 10.1080/16864360.2015.1131550.

[18] I. Dianat and A. Salimi, “Working conditions of Iranian hand-sewn shoe workers and associations with musculoskeletal symptoms,†Ergonomics, vol. 57, no. 4, pp. 602–611, Apr. 2014, doi: 10.1080/00140139.2014.891053.

[19] K. T. Ulrich, Product design and development. Tata McGraw-Hill Education, 2003, available at: Google Scholar.

[20] W. Karwowski, Anthropometry for The Needs of Rehabilitation. CRC Press, 2006, doi: 10.1201/9780849375477.

[21] A. Lesmana, A. Kusnayat, and M. Rahayu, “Perancangan Alat Pengangkut Bahan Bakar Kayu Custom Menggunakan Pendekatan Reverse Engineering (studi Kasus Pt. Xyz),†eProceedings Eng., vol. 4, no. 2, pp. 2843–2849, 2017, available at: http://202.134.6.251/index.php/engineering/article/view/1228.

[22] A. Kusnayat, S. Martini, E. Shabrina, and A. Rizal, “Application of Reverse Engineering for Modified Anchor Impeller,†World Sci. News, vol. 112, pp. 14–23, 2018, available at: http://psjd.icm.edu.pl/psjd/element/bwmeta1.element.psjd-1ae33f41-a2fb-4650-b5a9-5ab6e7e5b009.

[23] A. Gameros, L. De Chiffre, H. R. Siller, J. Hiller, and G. Genta, “A reverse engineering methodology for nickel alloy turbine blades with internal features,†CIRP J. Manuf. Sci. Technol., vol. 9, pp. 116–124, May 2015, doi: 10.1016/j.cirpj.2014.12.001.

[24] N. Al Hadid, A. Kusnayat, and M. Rahayu, “Perancangan Ulang Bak Penampung Bahan Baku Pakan Ternak Menggunakan Metode Reverse Engineering Untuk Mengurangi Risiko Kecelakaan Kerja,†eProceedings Eng., vol. 4, no. 2, pp. 2720–2730, 2017, available at: https://libraryeproceeding.telkomuniversity.ac.id/index.php/engineering/article/view/1168.

Downloads

Published

2019-07-31

Issue

Vol. 3 No. 1 (2019)

Section

Articles

License

All articles in Jurnal Sistem dan Manajemen Industri can be disseminated provided they include the identity of the article and the source of the article Jurnal Sistem dan Manajemen Industri. The publisher is not responsible for the contents of the article. The content of the article is the sole responsibility of the author

Creative Commons License

Jurnal Sistem dan Manajemen Industri is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

[1]
“Perancangan Alat Bantu untuk Liquid Container Berdasarkan Penilaian Rapid Entire Body Assessment dan Washington State Checklist”, j. sist. manaj. ind., vol. 3, no. 1, pp. 10–18, Jul. 2019, doi: 10.30656/jsmi.v3i1.1459.
Crossref
Scopus
Google Scholar
Europe PMC

Similar Articles

21-30 of 37

You may also start an advanced similarity search for this article.