Implementation of lean tools and techniques in an ethical papers production industry

Authors

  • Kukhan S Kongu Engineering College
  • Bhuvanesh Kumar M Kongu Engineering College

DOI:

https://doi.org/10.30656/jsmi.v5i2.3611

Keywords:

Lean manufacturing, Continuous production process, Paper manufacturing industry, 5S, Kaizen

Abstract

Lean manufacturing (LM) is established as a best practice to improve the performance of manufacturing industries. Not all the manufacturing industries realize the benefits of LM practices specifically continuous process industries. The present research work is intended to study the advantages of implementing LM practices in an ethical paper industry which is a continuous production industry. Presently, the industry suffers with the problems such as lack of productivity, raw material wastes, underutilized resources, and lack of standard practices in the production. Gemba technique is adapted to record the information related to the present manufacturing environment. Based on the current state analysis, the feasible lean tools are selected and implemented such as 5S, Kaizen, and Total Productive Maintenance (TPM). The improvements have been noted as reduced tool change over time, reduced material wastes, effective utilization of resources and provide safety guidelines to workers and operations. The implications of these improvements increased the productivity also.

References

O. O. Mejabi, “Framework for a lean manufacturing planning system,†Int. J. Manuf. Technol. Manag., vol. 5, no. 5–6, pp. 563–578, Jan. 2003, doi: https://doi.org/10.1504/IJMTM.2003.003710.

S. Taj, “Lean manufacturing performance in China: assessment of 65 manufacturing plants,†J. Manuf. Technol. Manag., vol. 19, no. 2, pp. 217–234, Feb. 2008, doi: https://doi.org/10.1108/17410380810847927.

J. P. Womack and D. T. Jones, “Beyond Toyota: How to root out waste and pursue perfection.,†Harv. Bus. Rev., vol. 74, no. 5, pp. 140–151, 1996. Available: https://hbr.org/1996/09/how-to-root-out-waste-and-pursue-perfection.

V. Swarnakar and S. Vinodh, “Deploying Lean Six Sigma framework in an automotive component manufacturing organization,†Int. J. Lean Six Sigma, vol. 7, no. 3, pp. 267–293, Aug. 2016, doi: https://doi.org/10.1108/IJLSS-06-2015-0023.

M. B. Kumar, R. Parameshwaran, J. Antony, and E. Cudney, “Framework for Lean Implementation Through Fuzzy AHP-COPRAS Integrated Approach,†IEEE Trans. Eng. Manag., pp. 1–13, 2021, doi: https://doi.org/10.1109/TEM.2021.3089691.

M. Eswaramoorthi, G. R. Kathiresan, P. S. S. Prasad, and P. V Mohanram, “A survey on lean practices in Indian machine tool industries,†Int. J. Adv. Manuf. Technol., vol. 52, no. 9, pp. 1091–1101, 2011, doi: https://doi.org/10.1007/s00170-010-2788-y.

J. A. Garza-Reyes, H. S. Parkar, I. Oraifige, H. Soriano-Meier, and D. Harmanto, “An empirical-exploratory study of the status of lean manufacturing in India,†Int. J. Bus. Excell., vol. 5, no. 4, pp. 395–412, Jan. 2012, doi: https://doi.org/10.1504/IJBEX.2012.047906.

V. Swarnakar, A. kr Tiwari, and A. R. Singh, “Assessing Benefits of Lean Six Sigma Approach in Manufacturing Industries: An Indian Context,†in Operations Management and Systems Engineering, Springer, 2021, pp. 127–144, doi: https://doi.org/10.1007/978-981-15-6017-0_8.

S. S. Mahapatra and S. R. Mohanty, “Lean manufacturing in continuous process industry: an empirical study,†J. Sci. Ind. Res. (India)., vol. 66, no. 1, pp. 19–27, 2007. Available: http://nopr.niscair.res.in/handle/123456789/1104.

A. Panwar, R. Jain, A. P. S. Rathore, B. Nepal, and A. C. Lyons, “The impact of lean practices on operational performance – an empirical investigation of Indian process industries,†Prod. Plan. Control, vol. 29, no. 2, pp. 158–169, Jan. 2018, doi: https://doi.org/10.1080/09537287.2017.1397788.

A. Panwar, R. Jain, and A. P. S. Rathore, “Lean implementation in Indian process industries – some empirical evidence,†J. Manuf. Technol. Manag., vol. 26, no. 1, pp. 131–160, Jan. 2015, doi: https://doi.org/10.1108/JMTM-05-2013-0049.

M. Dudek-Burlikowska, “Quality research methods as a factor of improvement of preproduction sphere,†J. Achiev. Mater. Manuf. Eng., vol. 18, no. 1–2, pp. 435–438, 2006. Available: http://jamme.acmsse.h2.pl/papers_amme06/1181.pdf.

S. Elango, D. Ajay, B. D. Venkatesh, and S. N. Dinesh, “Implementing 5S Practice in Foundry Shop,†Int. J. Res. Eng. Sci. Manag., vol. 3, no. 8, pp. 367–370, 2020. Available: https://www.journals.resaim.com/ijresm/article/view/201.

M. Bhuvanesh Kumar and R. Parameshwaran, “Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organisation,†Prod. Plan. Control, vol. 29, no. 5, pp. 403–417, Apr. 2018, doi: https://doi.org/10.1080/09537287.2018.1434253.

M. B. Kumar and R. Parameshwaran, “Fuzzy weighted geometric mean approach-based FMEA to prioritise lean failure modes in manufacturing industries,†Int. J. Manuf. Technol. Manag., vol. 33, no. 6, pp. 398–427, Jan. 2019, doi: https://doi.org/10.1504/IJMTM.2019.104550.

P. D. Wickens, “Production management: Japanese and British approaches,†IEE Proc. A (Physical Sci. Meas. Instrumentation, Manag. Educ., vol. 137, no. 1, pp. 52–54, Jan. 1990, doi: https://doi.org/10.1049/ip-a-2.1990.0007.

A. Kumar Arya and S. Kumar Jain, “Impacts of Kaizen in a small-scale industry of India: a case study,†Int. J. Lean Six Sigma, vol. 5, no. 1, pp. 22–44, Jan. 2014, doi: https://doi.org/10.1108/IJLSS-03-2013-0019.

J. P. Acharya and M. J. Bhatt, “A brief literature review on Total Productive Maintenance,†Int. J. Adv. Eng. Res. Dev., vol. 1, no. 5, pp. 1–8, 2014. Available: http://www.ijaerd.com/papers/finished_papers/ijaerd%2014-0168.pdf.

P. Gupta, S. Vardhan, and M. S. Al Haque, “Study of success factors of TPM implementation in Indian industry towards operational excellence: An overview,†in 2015 International Conference on Industrial Engineering and Operations Management (IEOM), 2015, pp. 1–6, doi: https://doi.org/10.1109/IEOM.2015.7093740.

E. Y. T. Adesta, H. A. Prabowo, and D. Agusman, “Evaluating 8 pillars of Total Productive Maintenance (TPM) implementation and their contribution to manufacturing performance,†IOP Conf. Ser. Mater. Sci. Eng., vol. 290, p. 12024, 2018, doi: https://doi.org/10.1088/1757-899x/290/1/012024.

M. B. Kumar and R. Parameshwaran, “A comprehensive model to prioritise lean tools for manufacturing industries: a fuzzy FMEA, AHP and QFD-based approach,†Int. J. Serv. Oper. Manag., vol. 37, no. 2, pp. 170–196, Jan. 2020, doi: https://doi.org/10.1504/IJSOM.2020.110337.

Downloads

Published

2021-11-18

Issue

Vol. 5 No. 2 (2021)

Section

Research Article

License

All articles in Jurnal Sistem dan Manajemen Industri can be disseminated provided they include the identity of the article and the source of the article Jurnal Sistem dan Manajemen Industri. The publisher is not responsible for the contents of the article. The content of the article is the sole responsibility of the author

Creative Commons License

Jurnal Sistem dan Manajemen Industri is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

[1]
“Implementation of lean tools and techniques in an ethical papers production industry”, j. sist. manaj. ind., vol. 5, no. 2, pp. 63–73, Nov. 2021, doi: 10.30656/jsmi.v5i2.3611.
Crossref
Scopus
Google Scholar
Europe PMC

Similar Articles

11-20 of 67

You may also start an advanced similarity search for this article.