Perancangan dan Pengembangan Bed Shower Menggunakan Metode Quality Function Deployment (QFD) Berdasarkan Prinsip Ergonomi

Authors

  • Ayi Fitriani Universitas Islam Indonesia
  • Hari Purnomo Universitas Islam Indonesia

DOI:

https://doi.org/10.30656/jsmi.v2i2.629

Keywords:

Bed Shower, Design, House of Quality, QFD

Abstract

This research was conducted to design a bed shower and study the design and development of a bed shower for patient needs. The purpose of creating a bed shower is because of the lack for these tools to make it easier for nurses to bathe patients who are paralyzed or unable to move their limbs. The method used in this study uses the measurement parameters of the Quality Function Deployment (QFD) method. The results of the study obtained lightly designed tools that were the priority. The next variable that is considered is ergonomic, durable, comfortable to use and clean, and finally, the price is affordable. The design of the bed shower pays more attention to the principle of ergonomics by paying attention to the material used. Bed shower designed with three dimensions using Solid Work software with the translation of the concept that consumers want is realized by providing trolley wheels and bath pads that are easily dry and easily folded and carried. While the size of the tool with a length of 216 cm, width of 60 cm, trolley height of 107 cm, width of the trolley of 29 cm, display tools that are easy and practical, easy to clean allow tools to be separated, have durable durability with an estimate of more than 5 years , having a cheap price is around Rp. 5,000,000, - by making selected materials and maximizing the function of one pump.

References

K.-A. Hsiao and L.-L. Chen, “Fundamental dimensions of affective responses to product shapes,†Int. J. Ind. Ergon., vol. 36, no. 6, pp. 553–564, 2006.

T. Poulain, J. Mendez, G. Henaff, and L. De Baglion, “Characterization of damage during low cycle fatigue of a 304L austenitic stainless steel as a function of environment (air, PWR environment) and surface finish (polished, ground),†Procedia Eng., vol. 160, pp. 123–130, 2016.

Kementerian Kesehatan Republic of Indonesia, Profil kesehatan Indonesia tahun 2013. Jakarta: Kementerian Kesehatan RI, 2014.

A. Stephan-Carlier, J. Facione, E. Speyer, E. Rumilly, and J. Paysant, “Quality of life and satisfaction after multilevel surgery in cerebral palsy: Confronting the experience of children and their parents,†Ann. Phys. Rehabil. Med., vol. 57, no. 9–10, pp. 640–652, 2014.

C. Cosseau et al., “Proteobacteria from the human skin microbiota: species-level diversity and hypotheses,†One Heal., vol. 2, pp. 33–41, 2016.

N. Nevala and L. Tamminen-Peter, “Ergonomics and usability of an electrically adjustable shower trolley,†Int. J. Ind. Ergon., vol. 34, no. 2, pp. 131–138, 2004.

Medical Eshop, “ArjoHuntleigh Concerto Shower Trolley- Basic (online),†2017. [Online]. Available: https://www.medicaleshop.com/arjohuntleigh-carevo-shower-trolley.html.

Badan Pusat Statistik, Pendapatan Nasional Indonesia 2012-2016. Jakarta: Badan Pusat Statistik, 2017.

J. Servert, A. Labanda, E. Fuentealba, M. Cortes, and R. Pérez, “Quality Function Deployment analysis for the selection of four utility-scale solar energy projects in northern Chile,†Energy Procedia, vol. 49, pp. 1896–1905, 2014.

D. Y. Irawati, M. L. Singgih, and B. Syarudin, “Integrasi Quality Function Deployment (QFD) dan Conjoint Analysis untuk Mengetahui Preferensi Konsumen,†J. Optimasi Sist. Ind., vol. 13, no. 2, pp. 618–640, 2016.

F. Ardani, R. Ginting, and A. Ishak, “Perancangan Desain Produk Spring Bed Dengan Menggunakan Metode Quality Function Deployment,†J. Tek. Ind. USU, vol. 5, no. 1, 2014.

R. E. Walpole and C. B. Allendoerfer, Introduction to statistics, vol. 2. New York, 1974.

Y. Akao, B. King, and G. H. Mazur, Quality function deployment: integrating customer requirements into product design. Cambridge: Productivity press, 1990.

L. R. Guinta, The QFD book: The team approach to solving problems and satisfying customers through quality function deployment. New York: Amacom, 1993.

R. G. Day, Quality function deployment: Linking a company with its customers. Milwaukee: ASQC Quality Press, 1993.

J. B. Revelle, J. W. Moran, and C. A. Cox, The QFD handbook. NewYork: John Wiley & Sons, 1998.

A. Altaboli, M. Belkhear, A. Bosenina, and N. Elfsei, “Anthropometric evaluation of the design of the classroom desk for the fourth and fifth grades of Benghazi primary schools,†Procedia Manuf., vol. 3, pp. 5655–5662, 2015.

R. Alojado, B. Custodio, K. M. Lasala, and P. L. Marigomen, “Designing an ergonomic chair for pedicurists and manicurists in Quezon City, Philippines,†Procedia Manuf., vol. 3, pp. 1812–1816, 2015.

I. W. Taifa and D. A. Desai, “Anthropometric measurements for ergonomic design of students’ furniture in India,†Eng. Sci. Technol. an Int. J., vol. 20, no. 1, pp. 232–239, 2017.

D. O. N. Diban and L. A. Gontijo, “The complexity of ergonomic in product design requirements,†Procedia Manuf., vol. 3, pp. 6169–6174, 2015.

A. Chen and L. Zhou, “The Improved Design of Sub-assembling Tray for an Engine,†Procedia Eng., vol. 174, pp. 512–517, 2017.

Ö. Erkarslan and H. Yılmaz, “Optimization of product design through quality function deployment and analytical hierarchy process: case study of a ceramic washbasin,†2011.

A. M. Basahel, “Investigation of work-related Musculoskeletal Disorders (MSDs) in warehouse workers in Saudi Arabia,†Procedia Manuf., vol. 3, pp. 4643–4649, 2015.

S. Cruchley, M. Twite, A. Tweddle, G. Wagner, A. Wisbey, and R. Lee, “A novel method for uniaxial HCF testing of austenitic stainless steels,†Procedia Eng., vol. 160, pp. 285–291, 2016.

Downloads

Published

2018-12-26

Issue

Vol. 2 No. 2 (2018)

Section

Articles

License

All articles in Jurnal Sistem dan Manajemen Industri can be disseminated provided they include the identity of the article and the source of the article Jurnal Sistem dan Manajemen Industri. The publisher is not responsible for the contents of the article. The content of the article is the sole responsibility of the author

Creative Commons License

Jurnal Sistem dan Manajemen Industri is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

[1]
“Perancangan dan Pengembangan Bed Shower Menggunakan Metode Quality Function Deployment (QFD) Berdasarkan Prinsip Ergonomi”, j. sist. manaj. ind., vol. 2, no. 2, pp. 85–92, Dec. 2018, doi: 10.30656/jsmi.v2i2.629.
Crossref
Scopus
Google Scholar
Europe PMC

Similar Articles

41-47 of 47

You may also start an advanced similarity search for this article.