Pengendalian Kualitas Proses Pengemasan Gula  Dengan Pendekatan Six Sigma

Aulia Kusumawati; Lailatul Fitriyeni

doi:10.30656/jsmi.v1i1.173

Authors

Aulia Kusumawati Universitas Serang Raya
Lailatul Fitriyeni Universitas Serang Raya

DOI:

https://doi.org/10.30656/jsmi.v1i1.173

Keywords:

Quality, Production Process, Six Sigma

Abstract

The main factor to achieve business success in the era of globalization is quality. Quality control is key in maintaining customer loyalty. In the company's production process is still found the resulting product does not comply with the specified specifications. This study aims to determine the value of sigma and factors causing damage to the production process of bagging section For companies with quality control is expected to achieve corporate goals. In this study, the methods used is Six Sigma with define, measure, analyze, improve. Six Sigma result is measurement of company performance baseline at measurement stage that is company at condition 5,1 sigma with DPMO equal to 162,4532. The factors causing the disability of sugar packing are lack of research and skill of the operator, instability of conveyor speeds and jet engine position, machine hygiene condition, lack of weighing machine, and ineffective treatment, and control method.

References

Defrianto, E. D., & Farida. (2016). Analisis Kualitas Produk Gelas Kaca Crown dengan Metode Six Sigma dan Kaizen di PT. Semesta Raya Abadi Jaya Gresik. Jurnal Tekmapro, 10(1), 16–25.

Fransiscus, H., Juwono, C. P., & Astari, I. S. (2014). Implementasi Metode Six Sigma DMAIC untuk Mengurangi Paint Bucket Cacat di PT X. Jurnal Rekayasa Sistem Industri, 3(2), 59–64.

Karenza, G. M., Adianto, H., & Liansari, G. P. (2016). Pengurangan Jumlah Produk Cacat Kue Kering Nastar Keju di PT.Bonli Cipta Sejahtera Menggunakan Metode Six Sigma. Reka Integra, 4(2), 14–23.

Salomon, L. L., Ahmad, A., & Limanjaya, N. D. (2017). Strategi Peningkatan mutu Part Bening Menggunakan Pendekatan Metode Six Sigma (Studi Kasus Departemen Injection di PT. KG). Jurnal Ilmiah Teknik Industri, 3(3), 156–165.

Salomon, L. L., Kosasih, W., & Jap, L. (2017). Peningkatan Kualitas Benang DTY SIngle 150D/48F pada Mesin Cone Wender Menggunakan Metode Six Sigma dan Factorial Design di PT. Gemilang Indonesia. Jurnal Ilmiah Teknik Industri, 2(2), 1–11.

Wardhana, W., Harsono, A., & Liansari, G. P. (2015). Implementasi Perbaikan Kualitas Menggunakan Metode Six Sigma Untuk Mengurangi Cacat Produk Sajadah Pada Perusahaan Pada PT. Pondok Tekstil Kreasindo. Reka Integra, 3(1), 85–96.

Wibowo, C. M. A., & Aritonang, K. (2014). Penerapan Lean Six Sigma dan Activity-Based Costing Pada Perusahaan Garmen PT X. Jurnal Rekayasa Sistem Industri, 3(1), 10–19.

Wisnubroto, P., & Rukmana, A. (2015). Pengendalian Kualitas Produk dengan Pendekatan Six Sigma dan Analisis Kaizen Serta New Seven Tools sebagai Usaha Pengurangan Kecacatan Produk. Jurnal Teknik Industri, 8(1), 65–74.

Yanuarsih, B., Widaningrum, S., & Iqbal, M. (2012). Minimasi Waste Defect di PT. Eksonindo Multi Product Industri dengan Pendekatan Lean Six Sigma. Jurnal Rekayasa Sistem & Industri, 1(2), 34–40.