Vol. 3 No. 2 (2017)

DOI: https://doi.org/10.30656/intech.v3i2
Published: 2017-12-28

Articles

  • Usulan Penurunan Tingkat Kecacatan Produk Pelat Baja dengan Metode Six Sigma

    Muhamad Bob Anthony
    41-48
    DOI: https://doi.org/10.30656/intech.v3i2.877
    Abstract views: 309 , PDF downloads: 1559

  • Analisa Perawatan Mesin Pulper Menggunakan Metode Overall Equipment Effectiveness (OEE)

    Ade Mukhlis Shoutul Ahlaq, Dadi Cahyadi, Firdanis Setyaning Handika
    49-54
    DOI: https://doi.org/10.30656/intech.v3i2.878
    Abstract views: 605 , PDF downloads: 1759

  • Analisa Kinerja Mesin Roughing Stand dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode Effect Analysis (FMEA)

    Hasrul Hasrul, M. Jihan Shofa, Heru Winarno
    55-60
    DOI: https://doi.org/10.30656/intech.v3i2.879
    Abstract views: 1293 , PDF downloads: 871

  • Analisis Penjualan Baju Seragam Sekolah di Konveksi Hanifah Collection

    Ahmad Fazarudin, Ahmad Nalhadi, Gerry Anugrah Dwiputra
    61-66
    DOI: https://doi.org/10.30656/intech.v3i2.880
    Abstract views: 703 , PDF downloads: 1411

  • Analisis Pengurangan Cooling Water Loss Menggunakan Six Sigma dan Failure Mode Effect Analysis (FMEA)

    Ikhsan Wicaksono, Tri Joko Wibowo, M. Jihan Shofa
    67-72
    DOI: https://doi.org/10.30656/intech.v3i2.882
    Abstract views: 339 , PDF downloads: 652

  • Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting

    irwan Pegiardi, Firdanis Setyaning Handika, Supriyadi Supriyadi
    73-77
    DOI: https://doi.org/10.30656/intech.v3i2.881
    Abstract views: 1262 , PDF downloads: 7633