Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting

Authors

  • irwan Pegiardi Universitas Serang Raya
  • Firdanis Setyaning Handika Universitas Serang Raya
  • Supriyadi Supriyadi Universitas Serang Raya https://orcid.org/0009-0000-0661-2620

DOI:

https://doi.org/10.30656/intech.v3i2.881

Keywords:

Gas Cutting, RULA (Rapid Upper Limb Assessment), Workload

Abstract

The gas cutting area has several jobs that are risky to the operator, such as activities with squatting, bending positions. This study aims to determine the risk of work in the gas cutting area as a basis for improving work posture. The method used is RULA (Rapid Upper Limb Assessment) is a research method for investigating disorders of the upper limbs. By measuring the group A score and group B score. Based on the results of the RULA value in the process of operating the machine with a sitting position with a score 3. clearing the cutting plate with a bent position with a score of 5, and the highest score 6 in the grinding plate cutting. To reduce pain in the neck, torso, and arms, operators should not do work postures that cause pain in the body for a long time.

Downloads

Download data is not yet available.

References

Agustina, F., & Maulana, A. (2012). Analisis postur kerja dengan tinjauan ergonomi di industri batik Madura. Jurnal Inovasi Dan Kewirausahaan, 1(3), 167–171.

Ansari, N. A., & Sheikh, M. J. (2014). Evaluation of work Posture by RULA and REBA: A Case Study. IOSR Journal of Mechanical and Civil Engineering, 11(4), 18–23.

Budiman, E., & Setyaningrum, R. (2012). Perbandingan Metode-Metode Biomekanika Untuk Menganalisis Postur Pada Aktivitas Manual Material Handling (MMH) Kajian Pustaka. J@ Ti Undip: Jurnal Teknik Industri, 1(3), 46–52.

Correia, D. F., Yusuf, M., & Simanjuntak, R. A. (2016). Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (RULA) dan Ovako Working Posture Analysis System (OWAS). Jurnal Rekavasi, 4(2), 82–90.

Listiarini, A., Widjasena, B., & Wahyuni, I. (2016). Hubungan Kekuatan Otot Punggung Dengan Keluhan Nyeri Punggung Pada Porter Di Stasiun Tawang Semarang. Jurnal Kesehatan Masyarakat (e-Journal), 4(4), 636–644.

McAtamney, L., & Corlett, E. N. (1993). RULA: a survey method for the investigation of work-related upper limb disorders. Applied Ergonomics, 24(2), 91–99.

Nugraha, H. A., Astuti, M., & Rahman, A. (2013). Analisis Perbaikan Postur Kerja Operator Menggunakan Metode Rula Untuk Mengurangi Resiko Musculoskeletal Disorders (Studi Kasus pada Bagian Bad Stock Warehouse PT. X Surabaya). Jurnal Rekayasa Dan Manajemen Sistem Industri, 1(2), p229-240.

Nuryaningtyas, B. M., & Martiana, T. (2014). Analisis Tingkat Risiko Muskuloskeletal Disorders (MSDs) dengan The Rapid Upper Limbs Assessment (RULA) dan Karakteristik Individu Terhadap Keluhan MSDs. The Indonesian Journal of Occupational Safety and Health, 3(3), 160–169.

Downloads

Published

2017-12-28

How to Cite

Pegiardi, irwan, Handika, F. S., & Supriyadi, S. (2017). Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting. Jurnal INTECH Teknik Industri Universitas Serang Raya, 3(2), 73–77. https://doi.org/10.30656/intech.v3i2.881

Issue

Vol. 3 No. 2 (2017)

Section

Articles

License

Copyright (c) 2017 irwan Pegiardi, Firdanis Setyaning Handika, Supriyadi Supriyadi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.