Analisa Perawatan Mesin Pulper Menggunakan Metode Overall Equipment Effectiveness (OEE)

Authors

  • Ade Mukhlis Shoutul Ahlaq Universitas Serang Raya
  • Dadi Cahyadi Universitas Serang Raya
  • Firdanis Setyaning Handika Universitas Serang Raya

DOI:

https://doi.org/10.30656/intech.v3i2.878

Keywords:

Machine Maintenance, Overall Equipment Effectiveness, Pulper Machine

Abstract

This study aims to determine the effectiveness of Pulper machines. The research was conducted using the Overall Equipment Effectiveness method. The research conducted at a company engaged in the Pulp & Paper field. Data collected by interviews and conducting direct observations in the area during February 2017. Based on the research, it can conclude that the Pulley OEE value was obtained by 77.31% with the main factor causing damage was Broken Ragger by 46%. The proposed improvements that can be given to minimize the incidence of broken ragger are training of ragger machine operators regularly, planning maintenance of scheduled ragger machines as well as providing tools to make it easier for operators to repair damaged machines

Downloads

Download data is not yet available.

References

Bamber, C. J., Castka, P., Sharp, J. M., & Motara, Y. (2003). Cross-functional team working for overall equipment effectiveness (OEE). Journal of Quality in Maintenance Engineering, 9(3), 223–238.

Chan, F. T. S., Lau, H. C. W., Ip, R. W. L., Chan, H. K., & Kong, S. (2005). Implementation of total productive maintenance: A case study. International Journal of Production Economics, 95(1), 71–94.

Dal, B., Tugwell, P., & Greatbanks, R. (2000). Overall equipment effectiveness as a measure of operational improvement–a practical analysis. International Journal of Operations & Production Management, 20(12), 1488–1502.

Muchiri, P., & Pintelon, L. (2008). Performance measurement using overall equipment effectiveness (OEE): literature review and practical application discussion. International Journal of Production Research, 46(13), 3517–3535.

Nakajima, S. (1988). Introduction to TPM: total productive maintenance.(Tr. Productivity Press, Inc.

Suhendra, R., & Betrianis, B. (2005). Pengukuran Nilai Overall Equipment Effectiveness Sebagai Dasar Usaha Perbaikan Proses Manufaktur pada Lini Produksi (Studi Kasus Pada Stamping Production Division Sebuah Industri Otomotif). Jurnal Teknik Industri, 7(2), 91–100.

Supriyadi, S., Ramayanti, G., & Afriansyah, R. (2017). Analisis Total Productive Maintenance Dengan Metode Overall Equipment Effectiveness dan Fuzzy Failure Mode and Effects Analysis. SINERGI, 21(3), 165–172.

Swanson, L. (2001). Linking maintenance strategies to performance. International Journal of Production Economics, 70(3), 237–244.

Williamson, R. M. (2006). Using overall equipment effectiveness: the metric and the measures. Strategic Work System, Inc, 1–6.

Downloads

Published

2017-12-28

How to Cite

Ahlaq, A. M. S., Cahyadi, D., & Handika, F. S. (2017). Analisa Perawatan Mesin Pulper Menggunakan Metode Overall Equipment Effectiveness (OEE). Jurnal INTECH Teknik Industri Universitas Serang Raya, 3(2), 49–54. https://doi.org/10.30656/intech.v3i2.878

Issue

Vol. 3 No. 2 (2017)

Section

Articles