Technology content assessment for Indonesia-cable based tsunameter development strategy using technometrics model

Authors

  • Gani Soehadi National Research and Innovation Agency
  • Lesti Setianingrum National Research and Innovation Agency https://orcid.org/0000-0002-2777-5733
  • Sasono Rahardjo National Research and Innovation Agency
  • I Wayan Wira Yogantara National Research and Innovation Agency
  • Edhi Purnomo National Research and Innovation Agency
  • Michael Andreas Purwoadi National Research and Innovation Agency https://orcid.org/0000-0002-0437-9148
  • Irawan Santoso National Research and Innovation Agency

DOI:

https://doi.org/10.30656/jsmi.v7i1.5748

Keywords:

INA-CBT TEWS, Technology component contribution, Technometrics, AHP

Abstract

This research aims to calculate the value of the Technology Contribution Coefficient (TCC) and determine the priority of technology component improvement in the development of the Indonesia-Cable Based Tsunameter (INA-CBT) Tsunami Early Warning System (TEWS) conducted by the National Research and Innovation Agency (BRIN) Research Center for Electronics (RCE). In this study, the Technometrics model is used to calculate the technology contribution of technology components and TCC, while Analytical Hierarchy Process (AHP) is used to calculate the value of the technology contribution intensity of technology components. The results showed that the TCC value of the RCE is 0.55 (Good). With the state-of-the-art value of 1, the RCE still has the opportunity to make improvements, especially on Infoware components with the lowest contribution value, to increase TCC. In calculating the technology contribution intensity, Infoware obtained the highest score of 0.447 compared to other technology compo­nents, therefore Infoware needs to be prioritized for improvement so that it is expected that the management of RCE can increase the quality and accuracy of the engineering design and simulation stage because it is a critical point in the development of INA-CBT.

References

F. Febriani, ‘Seismicity around the Cimandiri fault zone, West Java, Indonesia’, in AIP Conference Proceedings, 2016, vol. 1711, no. 1, p. 070003, doi: https://doi.org/10.1063/1.4941644.

R. Rajindra, Z. Sabara, D. Pushpalal, M. A. Samad, A. Yani, and R. Umam, ‘Diversity, resilience, and tragedy: Three disasters in Palu of Indonesia’, nternational J. Innov. Creat. Chang., vol. 5, no. 2, pp. 1592–1607, 2019, [Online]. Available: https://www.ijicc.net/images/Vol5iss2_/91_Rajindra_P1592_2019R.pdf.

National Centers for Environmental Information, ‘Tsunami Events in Indonesia’, National Oceanic and Atmospheric Administration, 2021. https://www.ngdc.noaa.gov/hazel/view/hazards/tsunami/event-data?country=INDONESIA.

N. Santosa, N. Anwar, B. Muljo Sukojo, and W. Al Madhoun, ‘Accelerating information of tsunami disaster using early warning system (EWS) Devices: smart solution for communication, navigation and surveillance due to tidal sea level’, E3S Web Conf., vol. 331, p. 07008, Dec. 2021, doi: https://doi.org/10.1051/e3sconf/202133107008.

S. Syugiarto, ‘Disaster Management System in Indonesia’, Sumatra J. Disaster, Geogr. Geogr. Educ., vol. 5, no. 2, pp. 87–96, 2021, [Online]. Available: http://sjdgge.ppj.unp.ac.id/index.php/Sjdgge/article/view/377.

Y. S. Manurung, J. Widjayanto, and H. Saragih, ‘Institusional role in analysis of installation of Tsunami Natural Disaster Detection Equipment using Analytical Hierarchy Process (AHP) and Cost Benefit Analysis Methods’, Tech. Soc. Sci. J., vol. 30, pp. 589–601, Apr. 2022, doi: https://doi.org/10.47577/tssj.v30i1.6207.

G. T. Schmitz, W. Rutzen, and W. Jokat, ‘Cable-Based Geophysical Measurement And Monitoring Systems, New Possibilities For Tsunami Early-Warnings’, in 2007 Symposium on Underwater Technology and Workshop on Scientific Use of Submarine Cables and Related Technologies, Apr. 2007, pp. 301–304, doi: https://doi.org/10.1109/UT.2007.370807.

P. Gupta and V. Purwar, ‘Comparative Performance Analysis of Single Mode Fiber over Different Channels Using Matlab’, Int. J. Eng. Tech. Res., vol. 8, no. 3, pp. 12–19, 2018, [Online]. Available: https://erpublication.org/published_paper/IJETR2519.pdf.

M. A. Purwoadi, W. W. Yogantara, S. Rahardjo, E. Purnomo, L. Setianingrum, and M. Hamidah, ‘Nonlinear Injection Control of Isolated DC-DC Converter for Cable-based Seabed Observatory Platform’, in International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), Dec. 2022, pp. 1–5, doi: https://doi.org/10.1109/ICRAMET56917.2022.9991165.

X. Xerandy, T. Znati, and L. K, ‘Cost-Effective, Cognitive Undersea Network for Timely and Reliable Near-Field Tsunami Warning’, Int. J. Adv. Comput. Sci. Appl., vol. 6, no. 7, pp. 224–233, 2015, doi: https://doi.org/10.14569/IJACSA.2015.060730.

N. Takahashi et al., ‘Real-Time Tsunami Prediction System Using DONET’, J. Disaster Res., vol. 12, no. 4, pp. 766–774, Aug. 2017, doi: https://doi.org/10.20965/jdr.2017.p0766.

M. Inoue, Y. Tanioka, and Y. Yamanaka, ‘Method for Near-Real Time Estimation of Tsunami Sources Using Ocean Bottom Pressure Sensor Network (S-Net)’, Geosciences, vol. 9, no. 7, pp. 1–21, Jul. 2019, doi: https://doi.org/10.3390/geosciences9070310.

S. Aoi et al., ‘MOWLAS: NIED observation network for earthquake, tsunami and volcano’, Earth, Planets Sp., vol. 72, no. 1, p. 126, 2020, doi: https://doi.org/10.1186/s40623-020-01250-x.

N.-C. Hsiao, T.-W. Lin, S.-K. Hsu, K.-W. Kuo, T.-C. Shin, and P.-L. Leu, ‘Improvement of earthquake locations with the Marine Cable Hosted Observatory (MACHO) offshore NE Taiwan’, Mar. Geophys. Res., vol. 35, no. 3, pp. 327–336, 2014, doi: https://doi.org/10.1007/s11001-013-9207-3.

Deputi Bidang Teknologi Pengembangan Sumberdaya Alam, ‘Grand Design Penguatan dan Pengembangan Indonesia Tsunami Early WarningSystem (InaTEWS)’, Badan Pengkajian dan Penerapan Teknologi, 2020, [Online]. Available: https://docplayer.info/207862262-Grand-design-penguatan-dan-pengembangan-indonesia-tsunami-early-warning-system-inatews-bppt.html.

A. Privadi, D. R. Damara, P. L. Widati, and F. R. Triputra, ‘Indonesia’s Cable Based Tsunameter (CBT) System as an Earthquake Disaster Mitigation System in East Nusa Tenggara’, in 2021 IEEE Ocean Engineering Technology and Innovation Conference: Ocean Observation, Technology and Innovation in Support of Ocean Decade of Science (OETIC), Nov. 2021, pp. 63–67, doi: https://doi.org/10.1109/OETIC53770.2021.9733734.

A. N. Burhani, L. Mulyani, and C. Pamungkas, The National Research and Innovation Agency (BRIN): A new arrangement for research in Indonesia. ISEAS Yusof Ishak Institute, 2021.[Online]. Available: https://www.iseas.edu.sg/wp-content/uploads/2021/10/TRS18_21.pdf.

M. Iqbal et al., ‘Performance Analysis of Indonesia Cable Based Tsunameter (INA-CBT) Rokatenda Ring Topology’, in 2021 IEEE Ocean Engineering Technology and Innovation Conference: Ocean Observation, Technology and Innovation in Support of Ocean Decade of Science (OETIC), 2021, pp. 57–62, doi: https://doi.org/10.1109/OETIC53770.2021.9733745.

B. G. Irianto, A. Rahman, and H. Andayani, ‘Technology Content Analysis with Technometric Theory Approach to Improve Performance in Radiodiagnostic Installation’, TELKOMNIKA Indones. J. Electr. Eng., vol. 14, no. 2, pp. 353–362, May 2015, doi: https://doi.org/10.11591/telkomnika.v14i2.7676.

I. Siregar, R. M. Sari, K. Syahputri, I. Rizkya, Y. Hanifiah, and M. A. Muchtar, ‘Indicators Coefficient Calculation Using Technoware, Humanware, Organware and Infoware’, in Proceedings of the 1st International Conference on Social and Political Development (ICOSOP 2016), Nov. 2017, pp. 89–95, doi: https://doi.org/10.2991/icosop-16.2017.12.

A. E. Gudanowska, ‘Technology Mapping – Proposal of a Method of Technology Analysis in Foresight Studies’, Verslas Teor. ir Prakt., vol. 17, no. 3, pp. 243–250, Sep. 2016, doi: https://doi.org/10.3846/btp.2016.774.

S. Miranda and E. Kusrini, ‘Technology Content Assessment for Technology Development in Small Medium Enterprise (SME) of Wood Furniture: A Case Study’, in 2021 IEEE 8th International Conference on Industrial Engineering and Applications (ICIEA), 2021, pp. 242–246, doi: https://doi.org/10.1109/ICIEA52957.2021.9436690.

W. Susihono, ‘Technology assessment to determine total contribution of coefficient, technoware, humanware, inforware, and organware in metal industry of creative community’, in The 1st ICETIA, 2014, pp. 249–253, [Online]. Available: https://publikasiilmiah.ums.ac.id/xmlui/handle/11617/4990.

G. Taib, S. Santosa, M. Djalal, and H. Helmi, ‘Evaluation in Component Technology Small Scale Food Industry Cluster in West Sumatera’, Int. J. Adv. Sci. Eng. Inf. Technol., vol. 4, no. 2, pp. 60–63, 2014, doi: https://doi.org/10.18517/ijaseit.4.2.368.

S. M. J. Mirzapour Al-e-Hashema, H. Soleimani, and Z. Sazvar, ‘An innovation measurement model based on THIO classification: an automotive case study’, J. Optim. Ind. Eng., vol. 11, no. 2, pp. 7–15, 2018, doi: https://doi.org/10.22094/JOIE.2018.565918.1555.

Y. A. Matin and A. Toloui, ‘Measuring technological level and capability of the industries in East Azerbaijan and providing proper strategies for improvement and promotion of technology’, Adv. Environ. Biol., vol. 8, no. 25, pp. 408–413, 2014, [Online]. Available: http://www.aensiweb.net/AENSIWEB/aeb/aeb/Special 15/408-413.pdf.

A. Rumanti and H. Wirawan, ‘Organizational Culture Transformation towards Management of Technology’, J. Econ. Bus. Manag., vol. 3, no. 10, pp. 999–1003, 2015, doi: https://doi.org/10.7763/JOEBM.2015.V3.323.

Y. Yulherniwati and A. Ikhsan, ‘Assessment of Institution Readiness in Adopting Technology: A Study on Vocational Education Internal Quality Assurance System’, 2020, doi: https://doi.org/10.4108/eai.24-1-2018.2292395.

I. Fauzi, F. M. Hasby, and D. Irianto, ‘Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products’, IOP Conf. Ser. Mater. Sci. Eng., vol. 319, no. 1, p. 12086, 2018, doi: https://doi.org/10.1088/1757-899X/319/1/012086.

M. Muksin, U. C. Mulyono, and S. Sutrisno, ‘Strategies To Improve Operational Readiness Of The Indonesian Navy’s Anti-Submarine Helicopters In AntiSubmarine Warfare Using The Technometric Method’, in The 4th International Conference on Maritime Science And Technology, 2020, vol. 4, no. 1, pp. 150–159, [Online]. Available: http://www.seminarpasca-sttal.ac.id/index.php/seminarpasca-sttal/article/view/41.

S. Utomo and N. Setiastuti, ‘Penerapan Metode Technometrik Untuk Penilaian Kapabilitas Teknologi Industri Galangan Kapal Dalam Menyongsong Era Industri 4.0’, J-SAKTI (Jurnal Sains Komput. dan Inform., vol. 3, no. 1, pp. 100–114, Mar. 2019, doi: https://doi.org/10.30645/j-sakti.v3i1.105.

S. Antesty, A. E. Tontowi, and A. Kusumawanto, ‘Mapping The Degree Of Technological Capability In Small And Medium Industry Of Automotive Components’, ASEAN J. Syst. Eng., vol. 4, no. 1, pp. 13–19, Jul. 2020, doi: https://doi.org/10.22146/ajse.v4i1.59066.

A. A. Rumanti and V. Hadisurya, ‘Analysis of Innovation based on Technometric Model to Predict Technology Life Cycle in Indonesian SME’, Int. J. Innov. Enterp. Syst., vol. 1, no. 01, pp. 29–36, Dec. 2017, doi: https://doi.org/10.25124/ijies.v1i01.7.

W. Sulistiyowati and R. B. Jakaria, ‘Assessment of technology content level with integrated technometrics and Analytical Hierarchy Process (AHP) methods in small and medium enterprises’, IOP Conf. Ser. Mater. Sci. Eng., vol. 434, no. 1, p. 12246, 2018, doi: https://doi.org/10.1088/1757-899X/434/1/012246.

P. B. Aji and H. C. Wahyuni, ‘A Study on the Technology Content Assessment Based on Aspects of Food Safety in the Food Ingredient Company’, Spektrum Ind., vol. 20, no. 2, pp. 23–30, Oct. 2022, doi: https://doi.org/10.12928/si.v20i2.67.

B. M. Howe et al., ‘SMART Cables for Observing the Global Ocean: Science and Implementation’, Front. Mar. Sci., vol. 6, pp. 1–27, Aug. 2019, doi: https://doi.org/10.3389/fmars.2019.00424.

C. R. Barnes, M. M. R. Best, F. R. Johnson, L. Pautet, and B. Pirenne, ‘Challenges, Benefits, and Opportunities in Installing and Operating Cabled Ocean Observatories: Perspectives From NEPTUNE Canada’, IEEE J. Ocean. Eng., vol. 38, no. 1, pp. 144–157, Jan. 2013, doi: https://doi.org/10.1109/JOE.2012.2212751.

Downloads

Published

2023-06-19

Issue

Vol. 7 No. 1 (2023): June

Section

Research Article

License

All articles in Jurnal Sistem dan Manajemen Industri can be disseminated provided they include the identity of the article and the source of the article Jurnal Sistem dan Manajemen Industri. The publisher is not responsible for the contents of the article. The content of the article is the sole responsibility of the author

Creative Commons License

Jurnal Sistem dan Manajemen Industri is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

[1]
“Technology content assessment for Indonesia-cable based tsunameter development strategy using technometrics model”, j. sist. manaj. ind., vol. 7, no. 1, pp. 15–29, Jun. 2023, doi: 10.30656/jsmi.v7i1.5748.
Crossref
Scopus
Google Scholar
Europe PMC

Similar Articles

31-36 of 36

You may also start an advanced similarity search for this article.