Design of tools to reduce the risk level of work postures at warping station

Authors

  • Indira Kusuma Wardani Universitas Sebelas Maret
  • Irwan Iftadi Universitas Sebelas Maret
  • Rahmaniyah Dwi Astuti Universitas Sebelas Maret

DOI:

https://doi.org/10.30656/jsmi.v4i1.1997

Keywords:

Product design, REBA, Pahl and beitz method, Trolley

Abstract

Based on the REBA analysis, there is a risky operator work postures in the warping work station at PT. Iskandar Indah Printing Textile because they do not use work tools. The assessment of the level of work posture risk by the REBA method gets the result that the highest work element with a final score of 10 is obtained by taking warp yarn at the warping station. This study aims to produce a design tool to reduce the level of work posture risk in warping work station operators. Then the design of tools was carried out by the Pahl and Beitz method to produce three alternative product design concepts. Based on the three ideas, the best plan is chosen by using an Engineering Design Selection, and the result is the second design concept. The selected design is an adjustable trolley with a vertical screw drive system that is comfortable to use and does not cause a bending position on the operator because it has a trolley plate that can be adjusted in height as needed. The use of the trolley causes a decrease in the level of work posture risk from a high-risk level to a small risk level with a final score of 10 to 3.

References

E. Muslimah, I. Pratiwi, and F. Rafsanjani, “Analisis manual material handling menggunakan NIOSH equation,†J. Ilm. Tek. Ind., vol. 5, no. 2, pp. 53–60, 2006.

R. D. Astuti and I. Iftadi, Analisis dan Perancangan Sistem Kerja. Deepublish, 2016.

B. P. T. Nugroho, I. Iftadi, and T. Rochman, “Usulan Rancangan Troli Sebagai Alat Bantu Angkut Karung Gabah Dalam Rangka Perbaikan Postur Kerja di Penggilingan Padi (Studi Kasus: Penggilingan Padi di Sragen),†PERFORMA Media Ilm. Tek. Ind., vol. 12, no. 1, pp. 9–18, 2013.

S. Pheasant and C. M. Haslegrave, Bodyspace: Anthropometry, ergonomics and the design of work. Boca Raton: CRC Press, 2018.

L. P. Singh, "An investigation into work postures of workers engaged in casting industry: a study in India," Asian J. Manag. Sci., vol. 1, no. 1, pp. 17–22, 2012.

E. Grandjean, Fitting The Task to the Man: A Textbook of Occupational Ergonomics, 4th edition. Taylor & Francis, 1990.

O. Karhu, P. Kansi, and I. Kuorinka, "Correcting working postures in industry: A practical method for analysis," Appl. Ergon., vol. 8, no. 4, pp. 199–201, Dec. 1977.

S. Torp and B. E. Moen, "The effects of occupational health and safety management on work environment and health: A prospective study," Appl. Ergon., vol. 37, no. 6, pp. 775–783, Nov. 2006.

L. P. Singh, A. Bhardwaj, K. K. Deepak, and S. Sahu, "Small & medium Scale Casting and Forging Industry in India: an ergonomic study," Ergon. SA J. Ergon. Soc. South Africa, vol. 22, no. 1, pp. 36–56, 2010.

R. Bridger, Introduction to Ergonomics, Second Edition. London: CRC Press, 2008.

A. Zaheer and R. Khalid, "Ergonomics: A work place realities in Pakistan," Int. Posture J. Sci. Technol., vol. 2, no. 1, pp. 1–11, 2012.

S. Hignett and L. McAtamney, "Rapid Entire Body Assessment (REBA)," Appl. Ergon., vol. 31, no. 2, pp. 201–205, Apr. 2000.

A. Mentari, K. Kalsum, and U. Salmah, “Hubungan Karakteristik Pekerja dan Cara Kerja dengan Kelelahan Kerja pada Pemanen Kelapa Sawit di PT. Perkebunan Nusantara IV (PERSERO) Unit Usaha Adolina Tahun 2012,†J. Lingkung. dan Keselam. Kerja, vol. 1, no. 2, pp. 42–52, 2012.

A. Suwandi, M. Sulaiman, and E. Maulana, “Perancangan Mesin Eddy Current Separator Untuk Pemilah Sampah Logam Non-Ferrous (Studi Kasus Di Kabupaten Tegal),†in Seminar Nasional Sains dan Teknologi (SEMNASTEK), 2017, pp. 1–9.

G. Pahl, W. Beitz, J. Feldhusen, and K.-H. Grote, Engineering Design. London: Springer London, 2007.

A. D. Aghnia, “Pemetaan Keluhan Muskuloskeletal Disorders Berdasarkan Faktor Risiko Pekerjaan Pekerja Produksi Bakso CV Unique Mandiri Perkasa Bekasi Tahun 2017,†UIN Syarif Hidayatullah Jakarta: Fakultas Kedokteran dan Ilmu Kesehatan, 2017.

P. Tarwaka and L. S. Bakri, Ergonomi Industri Dasar-dasar pengetahuan ergonomi dan aplikasi di tempat kerja. Surakarta: Harapan Press, 2010.

S. Surasno and B. Tjahjohartoto, “Rekayasa Ulang Dongkrak Rel Kereta Api Kapasitas 10 Ton,†J. Teknol. Bahan dan Barang Tek., vol. 4, no. 2, p. 63, Dec. 2014.

W. Zeiler, "Morphology in conceptual building design," Technol. Forecast. Soc. Change, vol. 126, pp. 102–115, Jan. 2018.

D. Nursyahuddin and D. Gasni, “Proses Perancangan Sistem Mekanik dengan Pendekatan Terintegrasi: Studi Kasus Perancangan Alat Uji Pin on Disc,†Teknika, vol. 21, no. 1, pp. 14–29, 2015.

I. W. Sukania, “Aspek Ergonomi Dalam Perbaikan Fasilitas Pembuat Cetakan Pasir di PT.X,†Seminar Nasional Tahunan Teknik Mesin (SNTTM), 2010.

T. K. Acharyaa" “Material handling and process improvement using lean manufacturing principle",†Int. J. Ind. Eng., vol. 18, no. 7, pp. 357–368, 2011.

M. Andriani, M. T. Hasan, Nazaruddin, and NinaFahriana" “Application of Anthropometry to Overcome Musculoskeletal Problem",†J. Phys. Conf. Ser., vol. 1114, p. 012008, Nov. 2018.

A. Sokhibi, M. A. Alifiana, and M. I. Ghozali, “Perancangan Troli Ergonomi pada Aktivitas Pengangkutan Beras di Penggilingan Padi,†J. Sist. dan Manaj. Ind., vol. 2, no. 2, pp. 111–117, Dec. 2018.

C. Ucar and T. Bayrak" “Improving In-plant Logistics: A Case Study of a Washing Machine Manufacturing Facility",†Int. J. Ind. Eng., vol. 22, no. 2, pp. 195–222, 2015.

Downloads

Published

2020-07-21

Issue

Vol. 4 No. 1 (2020)

Section

Research Article

License

All articles in Jurnal Sistem dan Manajemen Industri can be disseminated provided they include the identity of the article and the source of the article Jurnal Sistem dan Manajemen Industri. The publisher is not responsible for the contents of the article. The content of the article is the sole responsibility of the author

Creative Commons License

Jurnal Sistem dan Manajemen Industri is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

[1]
“Design of tools to reduce the risk level of work postures at warping station”, j. sist. manaj. ind., vol. 4, no. 1, pp. 30–40, Jul. 2020, doi: 10.30656/jsmi.v4i1.1997.
Crossref
Scopus
Google Scholar
Europe PMC