Analisis Pengendalian Persediaan Sistem Manajemen Persediaan Bahan Baku Kemasan

Authors

  • Suryani Suryani Program Studi Manajemen, Sekolah Tinggi Ilmu Ekonomi Al-Khairiyah
  • Dedi Can Program Studi Manajemen, Sekolah Tinggi Ilmu Ekonomi Al-Khairiyah

DOI:

https://doi.org/10.30656/intech.v4i2.977

Keywords:

Inventory, Quantity, Reorder Point, Safety Stock

Abstract

Inventory is one of the things that must be considered by the company. One way is to manage inventory management. The problem that occurs in the research location is the lack and excess stock for packaging raw materials. This lack of capital is due to the absence of calculations for the number of safety stock and reorder points, the cause of excess inventory is the excess in the absence of groupings of packaging raw materials to find out which products are more critical according to demand. Analysis of system improvements focuses on packaging raw materials. Based on the results of data processing obtained from 304 existing packaging raw materials, there are 15 packaging raw materials in class A. Processing is focused on class A only. Forecast calculations using SPSS software. And processing is continued by using the size-reorder point systems lot method with quantity results, reorder margin and safety stock that varies 15 raw materials according to the calculations performed.

References

Arif, M., Supriyadi, S., & Cahyadi, D. (2017). Analisis Perencanaan Persediaan Batubara FX Dengan Metode Material Requirement Planning. Jurnal Manajemen Industri Dan Logistik, 1(2), 53-60.

Assauri, S. (1999). Manajemen Produksi dan Pengendalian Produksi. Edisi Revisi, Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia.

Bahagia, S. N. (2006). Sistem Inventori. Bandung: Penerbit ITB.

Ballou, R. H. (2007). Business logistics/supply chain management: planning, organizing, and controlling the supply chain. India: Pearson Education.

Haming, M. & Mahfud N. (2014) Manajemen Produksi Modern: Operasi Manufaktur dan Jasa Buku 1. Jakarta: PT. Bumi Aksara. 2014.

Maisarah, D., Prassetiyo, H., & Rispianda, R. (2015). Rancangan Sistem Persediaan Bahan Baku Kertas Menggunakan Metode Single Item Single Supplier Dan Multi Item Single Supplier di CV. Dwimuharam Putra. REKA INTEGRA, 3(3), 63-74

Noeryanti, E. O., & Andriyani, F. (2012). Aplikasi Pemulusan Eksponensial Dari Brown Dan Dari Holt Untuk Data Yang Memuat Trend.Seminar Nasional Aplikasi Sains & Teknologi (SNAST) Periode III (pp 447-455)

Samak-Kulkarni, D. S., & Rajhans, D. N. (2013). Determination of Optimum Inventory Model for Minimizing Total Inventory Cost. Procedia Engineering , 803-809.

Supriyadi, S., & Riskiyadi, R. (2016). Penjadwalan Produksi IKS-Filler Pada Proses Ground Calcium Carbonate Menggunakan Metode MPS Di Perusahaan Kertas. Sinergi: Jurnal Teknik Mercu Buana, 20(2), 157-164.

Downloads

Published

2018-12-30

Issue

Section

Articles

How to Cite

Analisis Pengendalian Persediaan Sistem Manajemen Persediaan Bahan Baku Kemasan. (2018). Jurnal INTECH Teknik Industri Universitas Serang Raya, 4(2), 65-70. https://doi.org/10.30656/intech.v4i2.977