Analisis Time Series Perencanaan Inventory Naphtha dan Penentuan Reorder Point pada Crude C4

Authors

  • Kefin Rendi Kuncoro Universitas Serang Raya
  • Gina Ramayanti Universitas Serang Raya
  • Rosihin Rosihin Universitas Serang Raya

DOI:

https://doi.org/10.30656/intech.v2i1.863

Keywords:

Raw Materials, Reorder Point, Safety Stock

Abstract

The raw material used by this company is the result of refining petroleum in the form of naphtha and crude c4. In this discussion, there was often a buildup of ships in the Anchorage area before leaning on the Jetty because there was no ready storage of raw materials to receive cargo. To overcome the problem in inventory naphtha, it uses the exponential smoothing method by finding the smallest MAD. And to overcome the difficulty in C4 crude using the reorder point method to determine the existing safety stock. Based on the results of calculations using the exponential smoothing method, the smallest MAD is obtained which is 5099.66 with a value of α 0.9. And with the estimate of safety stock for naphtha tanks that is equal to 11898.5 tons with a safety factor of 95%. The results of the reorder point calculation on Crude C4 obtained a safety stock of 1959 Tons with ROP (Reorder Point) of 3959 Tons which means that when supplies have reached ROP, it is recommended to send the Crude C4 product to the shipment so that excessive production does not accumulate in the tank.

Downloads

Download data is not yet available.

References

Ariyadi, R. A. (2010). Manajemen persediaan dan penataan gudang spare part bus di PO. Safari Eka Kapti. UNS (Sebelas Maret University).

Dewi, A. S. (2011). Administrasi Produksi Barang Jadi di PT. Lombok Gandaria Foods Industry Jaten Karanganyar. UNS (Sebelas Maret University).

Nugraha, S. W., & Wijaya, A. R. (2015). Penentuan Safety Stock, Reorder Point, dan Order Quantity Suku Cadang Mesin Produksi Berdasarkan Ketidakpastian Demand dan Lead Time Pada Perusahaan Manufaktur. Fakultas Teknik Mesin Dan Teknik Industri, Universitas Gadjah Mada Yogyakarta.

Pambudi, P., Dwi, A., & Indrayani, R. (2014). Perencanaan Produksi Pada Kain Rayon, Polyster Dan Cotton Menggunakan Teknik Peramalan. Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 2(1), 2337–3636.

Rochaety, E., Tresnati, R., & Latief, A. M. (2007). Metodologi penelitian bisnis dengan aplikasi SPSS. Jakarta: Mitra Wacana Media.

Rohman, A. H., & Djatna, T. (2012). Model Perbaikan Penjadwalan Produksi di PT. MDS, Cikarang-Bekasi. E-Jurnal Agroindustri Indonesia, 1(1), 2252–3324.

Sutabri, T. (2012). Analisis sistem informasi. Penerbit Andi.

Tannady, H., & Andrew, F. (2013). Analisis Perbandingan Metode Regresi Linier dan Exponential Smothing Dalam Parameter Tingkat Error. Jurnal Teknik Dan Ilmu Komputer, 2(7), 242–250

Downloads

Published

2016-06-28

How to Cite

Kuncoro, K. R., Ramayanti, G., & Rosihin, R. (2016). Analisis Time Series Perencanaan Inventory Naphtha dan Penentuan Reorder Point pada Crude C4. Jurnal INTECH Teknik Industri Universitas Serang Raya, 2(1), 43–47. https://doi.org/10.30656/intech.v2i1.863

Issue

Section

Articles