Analisis Risiko Kerja pada Area Hot Metal Treatment Plant Divisi Blast Furnace dengan Metode Hazard Identification and Risk Assessment (HIRA)

  • Muhamad Bob Anthony Universitas Serang Raya
Abstract views: 245 , PDF downloads: 293
Keywords: Blast Furnace, Hazard Identification and Risk Assessment, Risk

Abstract

This study aims to determine the value of the risk of work hazard potential and the level of risk of potential occupational hazards in the blast furnace division of hot metal treatment plant which is currently in the commissioning stage. This study uses an approach with the HIRA (Hazard Identification and Risk Assessment) method to determine the value of the risk of potential occupational hazards and the level of risk of potential occupational hazards. The results obtained by using HIRA (Hazard Identification and Risk Assessment) obtained 26 risks classified by potential hazards, namely nine risks included in the high category (H), seven risks moderate category (M) and the remaining ten risks involved in the low category ( L). The recommendation that can give is to carry out detailed mitigation of the risk of high (H) and moderate (M) categories until the risk level falls to the risk of the low (L) category before the blast furnace plant is fully operating.

Downloads

Download data is not yet available.

References

Alauddin, M. R., Denny, H. M., & Jayanti, S. (2015). Analisis Hira (Hazard Identification and Risk Assessment) Pada Industri Tahu Serasi Bandungan Baru Semarang. Jurnal Kesehatan Masyarakat (e-Journal), 3(2), 158–167.

Ambarani, A. Y., & Tualeka, A. R. (2017). Hazard Identification And Risk Assessment (HIRA) Pada Proses Fabrikasi Plate Tanki 42-T-501a PT Pertamina (Persero) Ru Vi Balongan. The Indonesian Journal of Occupational Safety and Health, 5(2), 192–203.

Kurniawati, E., Sugiono, S., & Yuniarti, R. (2014). Analisis Potensi Kecelakaan Kerja Pada Departemen Produksi Springbed Dengan Metode Hazard Identification And Risk Assessment (HIRA)(Studi Kasus: PT. Malindo Intitama Raya, Malang, Jawa Timur). Jurnal Rekayasa Dan Manajemen Sistem Industri, 2(1), p11-23.

Panjaitan, N. (2017). Bahaya Kerja Pengolahan Rss (Ribbed Smoke Sheet) Menggunakan Metode Hazard Identification and Risk Assessment di PT. PQR. Jurnal Sistem Teknik Industri, 19(2), 50–57.

Ramli, S. (2010). Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. Jakarta: Dian Rakyat.

Restuputri, D. P., & Sari, R. P. D. (2015). Analisis kecelakaan kerja dengan menggunakan metode Hazard and Operability Study (HAZOP). Jurnal Ilmiah Teknik Industri, 14(1), 24–35.

Sulaksmono, M. (1997). Manajemen Keselamatan Kerja. Surabaya: Penerbit Pustaka.

Supriyadi, S., & Ramdan, F. (2017). Hazard Identification and Risk Assessment In Boiler Division using Hazard Identification Risk Assessment and Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health, 1(2), 161–177.

Suryanti, F., & Mulyono, M. (2017). Hazard Identification Dan Risk Assessement (HIRA) Pada pengoperasian Forklift Di PT Bangun Sarana Baja Gresik. Jurnal Ilmiah Kesehatan Media Husada, 6(2), 205–214.

Published
2019-07-01
How to Cite
Anthony, M. B. (2019). Analisis Risiko Kerja pada Area Hot Metal Treatment Plant Divisi Blast Furnace dengan Metode Hazard Identification and Risk Assessment (HIRA). Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(1), 35-42. https://doi.org/10.30656/intech.v5i1.1461
Section
Articles