Analisis Penyebab Kerusakan Hot Rooler Table dengan Menggunakan Metode Failure Mode And Effect Analysis (FMEA)


Muhamad Bob Anthony(1*),

(1) Universitas Serang Raya
(*) Corresponding Author

Abstract


This research was conducted in an international company engaged in iron and steel products manufacturing industries. One of the equipment that is often damaged is a hot roller table machine in the furnace section mill unit. The availability results obtained in hot roller table equipment is 96.571% and is still below the company standard which is set at 98%. Therefore, we need an analysis of the root causes of the problem and search for the best solution to fix the existing problem by applying the method of Failure Mode and Effect Analysis (FMEA). FMEA is a method that can systematically and structurally analyze and identify the consequences of a system or process failure, and also reduce or analyze the probability of failure. The purpose of this study is to identify and analyze the level of damage and its causes with the application of the FMEA method. Based on the pareto diagram the damage to the hot roller table machine, it was found that the highest frequency of damage was in the rotary coupling with a down time percentage of 26.9%. From the FMEA Analysis, two components that have very high RPN values are categorized as potential severit i.e. bearing as the first with an RPN value of 392 and the second is a seal ring with an RPN value of 294. The two components are the main priority for repair of the furnace section. mill, especially for machine and human aspects.


Keywords


Availability; Pareto Diagram; FMEA; RPN

Full Text:

PDF

References


Dhillon, B. S. (2006). Maintainability, Maintenance, and Reliability for Engineers. CRC press.

Ishikawa, K. (1982). Guide to Quality Control . Tokyo: Asian Productivity Organization.

Jannah, R. M., Supriyadi, S., & Nalhadi, A. (2017, November). Analisis Efektivitas Pada Mesin Centrifugal Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE). In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 170-175).

Octavia, L. (2010). Aplikasi Metode Failure Mode And Effects Analysis (FMEA) Untuk pengendalian kualitas pada proses Heat Treatment PT. Mitsuba Indonesia. Skripsi. Jakarta: Universitas Mercu Buana.

Reza, D., Supriyadi, S., & Ramayanti, G. (2017, November). Analisis Kerusakan Mesin Mandrel Tension Rell dengan Metode Failure Mode and Effect Analysis (FMEA). In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 190-195).

Stamatis, D. H. (2003). Failure mode and effect analysis: FMEA from theory to execution. ASQ Quality Press.


Article Metrics

Abstract view : 70 times| PDF : 54 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal INTECH



Jurnal INTECH Teknik Industri Universitas Serang Raya Indexed and Journal List Title by:

              

 

 

Jurnal Intech Universitas Serang Raya

View MyStat